Precision Fabrication Hardware Sheet Metal Stamped Deep Drawn Parts
Metal deep drawing, also known as drawing or calendering, mainly
relies on the pressure of a press to process metal materials
through stamping dies.
Features of the workpiece produced by stamping and drawing: light,
thin, evenly distributed, and strong compressive resistance.
Factors affecting the quality of hardware deep-drawn parts:
1. Stamping parts are made by punching under the condition that the
material consumption is not large. The parts are light in weight
and have good bending rigidity. After the sheet is plastically
deformed, the reasonable layout structure in the metal is not
improved. The compressive strength of stamping parts has improved;
2. The appearance and extension of the sheet metal for stamping
have a great influence on the quality of the stamping waste. It is
required that the stamping material should be roughly thick and
uniform; the surface should be bright, without scars, scratches,
and surface cracks; according to the uniform compressive strength,
No appreciable weight; very good uniform elongation; low
yield-to-strength ratio; low cold work hardening;
3. The stamping parts have a very good limit precision, which is
consistent with the limit of the mold parts, and has good
interchangeability. General installation and application
regulations can be achieved without further machining;
4. During the stamping process, since the inner part of the
material will not be damaged, it has good inner quality, and the
outer appearance is smooth and beautiful, which provides for inner
spraying, electroplating process, phosphating treatment and other
inner treatment. arbitrary conditions.
Product parameters:
| Die Design & Open | We use the most advanced die design software Auto CAD, Solidworks,
UG (dwg), we open dies and tools ourselves. |
| Our Capabilities: | tooling manufacturing, stamping, deep drawing, welding, tube
bending and surface coating service |
| Range of Materials: | Metal sheets include carbon steel, stainless steel, alloy steel,
aluminum, copper, etc. |
| Range of Material Thickness: | It is 0.2-10mm for punching, stamping, forming, no thickness limit
for welding. |
| Processing Range: | Progression die, Cutting, Stamping, Deep drawing, Bending,
Punching, Threading, Welding, Tapping, Riveting, Grinding |
| Surface Range: | Plating(zinc, nickel, chrome), electrophoresis, painting, powder
coating, electrostatic spraying, hot dip galvanized, dacromet,
anodic oxidation, blacking, polishing, anti-rust oil |
| Packaging | Our products are all packed in strong cartons and pallets/wooden
cases to ensure zero damage. |
