Custom Copper Busbar For New Energy Equipment
Copper bar, also known as copper bus bar or copper bus bar, is made
of copper material, and the cross-section is a rectangular or
chamfered (rounded) rectangular long conductor (now generally
rounded copper bars are used to avoid tip discharge), in The
circuit plays the role of conveying current and connecting
electrical equipment. Copper bars have been widely used in
electrical equipment, especially complete power distribution
devices.
Process preparation
1. According to the design drawings and production task list,
consider the best solution.
2. Check whether the model specifications of primary electrical
components and accessories meet the requirements of drawings and
bills of materials, and whether product licenses and certificates
of conformity are complete.
Selection of copper busbars
1. The specifications and materials of the main busbar are in
accordance with the design drawings, and the material of the branch
busbar is the same as that of the main circuit busbar without
special requirements.
2. The selection of the branch circuit busbar (conductor) shall be
selected according to the wire diameter marked in the figure. If it
is not marked, it shall be selected according to the current of the
circuit breaker release.
3. When the busbar is selected for the main circuit or branch
circuit, according to the rated current, select the cross-sectional
specification not less than the current carrying capacity in Table
2 and Table 3.
4. The grounding busbar (PE) of the low-voltage power distribution
device shall meet the requirements of Table 1.
5. The cross section of the grounding bus of the high-voltage power
distribution device should not be less than 30 square millimeters,
and the grounding wire through the door should not be less than 4
square millimeters.
6. The surface of the bus bar should be smooth, smooth, free of
cracks and inclusions.
Product parameters
Material | Non-ferrous alloy material like carbon steel,stainless
steel,galvanized steel,aluminum,copper,brass,etc |
Surface Finish | All kinds of surface treatment are available like chrome
plating,zinc plating,nick plating,powder coating,e-coating,dip
coating,mirror polishing,etc. |
Application | Electronic/Appliance/Auto/Industrial equipment metal stamping
hardware parts |
Processing | Our process includes tooling fabrication,stamping,deep
drawing,punching, spinning,laser cutting,bending,seamless
welding,machining and assembly |
Quality Control | Liability System and Periodical QC on line every hour |
Main Market | USA/Germany/Canada/Italy/United
Kingdom/Australia/Pakistan/French,etc |
