OEM Metal Milling Turning Service Aluminum CNC Machining Parts
The machining method of the surface of CNC machined parts first
depends on the technical requirements of the machined surface.
However, it should be noted that these technical requirements are
not necessarily the requirements specified in the part drawings,
and sometimes they may be higher than the requirements on the part
drawings in some respects due to technological reasons. The
processing requirements of the surface of the workpiece, or because
it is used as a precision benchmark, it may put forward higher
processing requirements.
When the technical requirements of the surface of each CNC machined
part are clarified, the final processing method that can guarantee
the requirements can be selected accordingly, and the processing
methods of several working steps and each working step can be
determined. The selected processing method of CNC machined parts
should meet the requirements of parts quality, good processing
economy and high production efficiency.
For this reason, the following factors should be considered when
selecting a processing method:
1. The machining accuracy and surface roughness that can be
obtained by any cnc machining method have a considerable range, but
only in a narrow range is economical, and the machining accuracy in
this range is the economic machining accuracy. For this reason,
when selecting the processing method, the corresponding processing
method that can obtain economical processing accuracy should be
selected.
2. Consider the properties of the cnc workpiece material.
3. Consider the structural shape and size of the CNC workpiece.
4. To consider productivity and economic requirements.
High-efficiency advanced technology should be used in mass
production. It is even possible to fundamentally change the
manufacturing method of the blank, which can reduce the labor of
machining.
Product parameters:
| cessing capacity: | CNC Turning, Milling, Drilling, Tapping;
Laser cutting;
Sheet metal fabrication;
Welding, bending, stamping;
Die casting |
| Material: | Aluminum alloy, Aluminum, Stainless steel, Carbon steel, Brass
copper, Sheet metal |
| Finishing: | Sand blasting, Anodizing, Powder coating, Brushing, Polishing, Heat
treating, Electroplating, Nickel plating, Zinc plating, Chrome
plating, Brass plating, Flange, Oxide finish |
| Standard: | GB, ASTM, JIS, DIN and others |
| Application: | CNC machining parts, Machinery parts, Metal parts |
| Certificate: | ISO9001:2015, SGS, ROSH, ITAF16949:2016 |
