10S 36V Li-ion Battery Protection Module PCB Protection Board 4-10S
BMS for 18650 Battery Pack oem
BMS 10S 36v 15A 20A 30A 40A 50A 60A with temperature sensor function and
balance lithium battery board BMS
36V Li-ion battery BMS 10S 36V 15A, 20A and 40A BMS For 36V lithium ion battery pack With balance function.
Function:
1) Power off detection (It can be locked when removed the PCM from
battery pack, to avoid safety accidents caused by users
unauthorized disassembly or replacement)
2) MOS statistics of overtemperature protection times (it can lock
up after N times overtemperature protection to avoid safety
accidents caused by user overload)
3) Power on timing (it can lock up after N years running, it means
we can design a lock time depends on the batteries service life,
then the user can’t replace the batteries by themself)
4) Counting discharge times (It can design lock up after N times
charge and discharge, then if can’t be work end of batteries
service life )
5) Add buzzer (it can make a sound to remind the user to charge
when the battery is stored for a long time, the voltage is too low
due to self discharge to protect batteries)
6) Unique ID (a unique ID number can be added to each board for
product tracing)
7) UART communication (communication with PC can be realized, to
setting and viewing the data of the above items 1-6 before
delivery)
8) Blue tooth function ,then you can check the batteries status by
your phone
PCM Specifications For 37V(10S) Li-ion Battery Packs
LUS-BMS10-V1.1
| No. | PARAMETER | Criterion |
| 1 | Voltage | Charging voltage | DC:42V CC/CV |
| Balance voltage for single cell | 4.125±0.025V |
| 2 | Current | Balance current for single cell | 80±5mA |
| Current consumption | ≤25μA |
| Maximal continuous charging current | 13.6A |
| Maximal continuous Discharging current | 20A |
| 3 | Over charge Protection | Over charge detection voltage for single cell | 4.25±0.025V |
| Over charge delay time | 800mS~1200mS |
| Over charge release voltage for single cell | 4.15±0.05V |
| 4 | Over discharge protection | Over discharge detection voltage for single cell | 2.80±0.08V |
| Over discharge detection delay time | 500~1500mS |
| Over discharge release voltage for single cell | 3.0±0.1V |
| 5 | Over current protection | Charge over-current protection | 24A±10% |
| Charge Over-Current Delay | 400~600mS |
| Discharge over-current protection1 | 55A±10% |
| Detection delay time1 | 700~1300mS |
| Discharge over-current protection2 | 40A±20% |
| Detection delay time2 | 800~1200mS |
| Release condition | Cut load,Automatic recovery |
| 6 | Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 1000mS-1600mS |
| Release condition | Cut load,Automatic recovery |
| 7 | Resistance | Protection circuitry(MOSFET) | ≤3mΩ |
| 8 | Temperature | Operating Temperature Range | -25～+70℃ |
| Storage Temperature Range | -40～+125℃ |
| Charge Over Temperature | 48.5℃±5℃ |
| Charge Under Temperature | -5℃±5℃ |
| Discharge Over Temperature | 70℃±5℃ |
| Discharge Under Temperature | -25℃±5℃ |
About your products,just tell us the relative voltage/ cells/
current A or equipment etc,
we will help to recomment the most suitable products for you. or we
design for you!
Shipment
All the items with tracking numbers and will be dispatched 7-15
business days by express after the payment is received. Once the
payment above our rule, we will send the parcel by suitable
shipping way, like UPS, DHL, FEDEX or special line, AIR or SEA etc.
Returns
(1)Defect: We will fully refund or send you a new replacement after
we checking.
(2)Dissatisfaction: Please contact within 7 days, we will fully
refund after get your returned goods.
(3)Missing parts/Q'ty: Please contact us in time, we will
redeliver,or a partial refund issued.
Feedback
1. Any questions, please contact us via message or email us.We will
reply your message within 24 hours except holiday. If you do not
receive our reply within 24 hours, please post a message again
because sometimes our message system may block some emails.
2. If you are satisfied with our service, please kindly leave us a
positive feedback and give us the Detailed Seller Rating with all
"5 stars" in very area
3. Our aim is to provide Top Level Customer Service, your
recognition will encourage us greatly and serve you better. We
strive to keep all our customers satisfy.
4. We greatly appreciate your POSITIVE feedback. Please do NOT
leave negative feedback without asking for help.Thanks!
