10G Full Rate BERT One Electric And One Optical Dual Channel
UC9210A 0.622 Gbps 1.25 Gbps 2.125 Gbps Optical Modules BERT Tester One
SFP Optical Channel
Performance character:
One SFP optical channel and One electric channel, Two channels
synchronous input and output, Error Code testing can be
independent.
Support for continuous error detection and timing error detection.
Support Full Rate from 622M up to 11.7Gbps；
Support code type: PRBS7 / PRBS 9 / PRBS 15 / PRBS 23 / PRBS 31
One channels low jitter clock output, the optical channel and the
electric channel share one clock, the two channels clock
synchronization.
Communication Mode USB HID or USB-COM.
Technical parameters
| No. | Parameter | Min | Type | Max | Unit |
| 1 | Data rate | 0.622 | 0.622,1.25,2.125,2.488,2.5,3.07,3.125,4.25, 5.0,6.144,6.25,7.5,8.5 ,9.953,10.00,10.3125,10.52,10.709, 11.09,11.32,11.7 | 11.7 | Gbps |
| 2 | Patterns | | PRBS7,PRBS9,PRBS15,PRBS23,PRBxS31 | | |
| 3 | Rise and fall times(20% to 80%) | | 18 | 23 | ps |
| 4 | Pattern Inversion | | Supports signal inversion at the transmitter and receiver | | |
| 5 | Signal output amplitude (single-ended) | 200 | 800 | 1000 | mV |
| 6 | Data output jitter(RMS) | | 1.5(10.3125G under) | | ps |
| 7 | Data input and output interface | | Differential, AC Coupled, 50 Ohm Impedance, SMA | | |
| 8 | Clock Out | 100 | 156.25 | 156.25 | MHz |
| 9 | Data signal input sensitivity (single-ended) | | 0.1 | | Vpp |
| 10 | Data Output Eye Crossover | 50 | 52 | 54 | % |
| 11 | Operating temperature | 10 | 25 | 50 | °C |
Ac Power Supply Requirements
The instrument complies with overvoltage class II regulations. The
operating voltage is 100 ~240V AC voltage, frequency range 48-66Hz,
operating voltage 115V When, the maximum consumption current is
230mA; Operating voltage 230V, the most
The maximum consumption current is 120mA.
The power cord
According to international safety standards, the instrument is
equipped with a 3-core power cord that meets national standards.
Only connect the power cord Plug into a power outlet with ground
protection.
Power indicator
The power indicator lights up when the instrument is powered on.
Communication Interface Description
There are two communication ports on the back panel of the
instrument, namely USB interface and RS232 interface.
The USB interface
USB interface is a standard 4-core B-type interface, which can be
connected to the instrument and PC, and the instrument can be
controlled by monitoring software.
FAQ
Q: Are you a factory manufacturer?
A: Yes we are manufacturer with 13 years experience in this
industry and supplied many good quality products.
Q: Where is your main market?
A: Asia, Europe, America, Middle-East, Africa and other countries
and regions.
Q:What is your minimum order quantity (MOQ)?
A: As a standard policy, we accept MOQ of 1set, and mixed items
available, it still needs to confirm with our sales according to
different product lines.
Q: Can I customize the size and color of the case?
A: Yes. We can discuss it .
Q: Can I buy some samples first before main orders? Is the sample
fee refundable?
A: Yes, sample fee and shipment fee should be paid in advance .
Q: How long is the Production Lead Time?
A: 5 days for stock products, different products have different
delivery times, according to the actual situation.
