Kobelco Excavator 18Meter Long Reach Boom And Arm For SK260
The video show of dipper arm extension
Product advantage of long excavator boom and arm:
01 Use Q355B material,
02 Adopts precision steel pipeline
03 Adopt alloy copper sleeve big arm base
04 Two layers groove welded to ensure
05 Double quality inspection before leaving
06 The tolerance of position size within 1 mm
07 Angle of boom and arm can reach 163°
Product Advantages:
1. The plate is wear-resistant and high-temperature resistant
square steel with high tensile strength. Each plate is verified by
the inspection institution
2. The shaft sleeve on the arm adopts the German standard JSUN
super-runin gold shaft sleeve. In the process of movement, each
hole of the shaft sleeve of the excavator can automatically oil
out, and the lubrication is free of blind area, so that the
excavator and the long arm can be more smoothly in the process of
work.
3. The excavator lengthened the upper arm pipeline and selected the
standard precision phosphating pipe to prevent tubing blockage and
other problems.
4, professional welding technology, full weld rules, every weld
after weld inspection.
Application range:
It is mainly used for earthwork foundation and deep cut excavation;
it is used in river dredging, port construction, subway
construction, and building foundation excavation. It has a wide
range of operations, high efficiency and high safety.
The specification of excavator boom stick
| Excavator Ton | Total Length(mm) | (A)Boom(mm) | (B)Arm(mm) | Maximum Digging Radius(mm) | Maximum Digging Depth(mm) | Maximum Unloading Height(mm) | Maximum Digging Height(mm) | Bucket Volume(cbm) | Cylinder(ton) |
| 11-15T | 13000 | 7250 | 5750 | 11200 | 9000 | 7550 | 9350 | 0.15-0.3 | 12T |
| 20-25T | 15400 | 8220 | 7180 | 14500 | 11300 | 10400 | 12600 | 0.4-0.6 | 12T |
| 20-30T | 18000 | 10000 | 8000 | 17300 | 13000 | 17200 | 14000 | 0.4-0.7 | 12T |
| 35-40T | 20000 | 11000 | 9000 | 19200 | 14900 | 12900 | 15200 | 0.6-1.2 | 12T |
| 40-45T | 22000 | 12000 | 10000 | 21300 | 16000 | 14000 | 17000 | 0.5-1 | 20T |
| 40-50T | 24000 | 13000 | 11000 | 23000 | 17900 | 15200 | 18100 | 0.5-1.1 |
Long Reach Kits Are Fully Compatible with ZHONGHE Excavator
Standard Buckets, Cylinder
| Excavator long boom | Excavator long arm | Standard bucket |
| Linkage kit | Bucket cylinder | Butter hose |
| Pin | Lubricatiing system | Seals |
Recommended Excavator Attachments
1. Long reach excavator boom
2. Excavator telescopic boom
3. Demolition boom
4. Excavator rock bucket
5. Excavator tilting bucket
6. Hydraulic grabs for excavators
FIRST--CORE CRAFT TECHNOLOGY
1. Less maintaince
Using high quality materials, such as Q355B as default, Q690D
optional, Niningbo connectors, seamless precision piplines,
graphite alloy copper sleeve, strong but light bucket cylinder.
2. Strong and sturdy
Built-in reinforcing ribs. Professional welding skill towards
different bearing position. Groove preparation(45° edge-mining)
before welding.
The pictures of excavator long arm for CAT
FAQ of Long Reach Excavator Boom
Q1: Why not have boom and stick cylinders in the plan?
A1: First, the whole long arm is lengthening, but the boom just
lengthening from its middel sleeve to its end, so the original boom
and stick cylinder can be used. Second, using the original parts
can save your cost.
Q2: How long is the boom arm can min excavator be be configured
with? Whether it is necessary to increase the counterweight?
A2. Generally speaking, 30-40 excavator longest arm suggests to be
8 meters, can configure 0.1 cbm bucket, no need extra
counterweight. 55 excavator longest arm suggests to be 12 meters,
can configure 0.1-0.15 cbm bucket, need 0.5 ton extra
counterweight. 60-80 excavator longest arm suggests to be 12
meters, can configure 0.15-0.25 cbm bucket, need 0.5-0.7 ton extra
counterweight.
It is not recommended to extend boom arm to longest length as min
excavator is easy to sloshing.
Q3: How long will it takes to install a excavator long reach boom?
It depends on the installer and machine size.
Usually disconnect the original boom arm, stick cylinder, then pin
the new one is okay.
Kindly remind, prepare several containers to fill the oil before
disassemble.
