Excavator Front Attachment 18m Long Reach Boom And Arm For Hitachi
ZX200 Excavator boom stick for backhoe dredger
The video show of dipper arm extension
Product advantage of long excavator boom and arm:
01 Use Q355B material,
02 Adopts precision steel pipeline
03 Adopt alloy copper sleeve big arm base
04 Two layers groove welded to ensure
05 Double quality inspection before leaving
06 The tolerance of position size within 1 mm
07 Angle of boom and arm can reach 163°
Product Features:
according to customer requirements design and production of
two-stage excavator elongated arm, mainly suitable for earth and
stone foundation and deep cut excavation operations; Used in river dredging, port construction, subway construction,
building foundation excavation, a wide range of operations, high
efficiency, safety
CUSTOMIZATION:
1. Applicable for all brand excavator.
2. Color, length, material can do according to you.
3. Extra pipeline can be added to suit to some extra application.
4. Boom cylinder and stick cylinder can also be supplied if
customer want.
GOOD SERVICE:
1. Online support within 24 hours.
2. Appointment video technical support.
(Our engineers have focused on excavator boom and attachment over
10 years)
3. Long excavator boom shall be two/three jointed pcs to make it
fittable into container to save shipping cost.
The factory of excavator boom and stick long introduce
The long arm of the excavator is made of Q355B steel with good
strength and rigidity. The shaft sleeve of the lengthened arm is
generally made of 45 # steel, with 40Cr bushing inside, together
with the lubricating effect of butter, it reduces the shear force
produced when the shaft and the sleeve rotate frequently, thus, the
service life of shaft sleeve is increased. The excavator long arm
structure is generally a box-type structure, that is, the upper and
lower two cover plates, plus the left and right two sidewall are
combined to form, the inside needs to be welded with buffer bars,
and the buffer bars must be opened with elliptical holes, this can
better release the extension arm in the welding work produced by
the stress, to avoid damage to the extension arm.
The specification of excavator boom stick
| Excavator Ton | Total Length(mm) | (A)Boom(mm) | (B)Arm(mm) | Maximum Digging Radius(mm) | Maximum Digging Depth(mm) | Maximum Unloading Height(mm) | Maximum Digging Height(mm) | Bucket Volume(cbm) | Cylinder(ton) |
| 11-15T | 13000 | 7250 | 5750 | 11200 | 9000 | 7550 | 9350 | 0.15-0.3 | 12T |
| 20-25T | 15400 | 8220 | 7180 | 14500 | 11300 | 10400 | 12600 | 0.4-0.6 | 12T |
| 20-30T | 18000 | 10000 | 8000 | 17300 | 13000 | 17200 | 14000 | 0.4-0.7 | 12T |
| 35-40T | 20000 | 11000 | 9000 | 19200 | 14900 | 12900 | 15200 | 0.6-1.2 | 12T |
| 40-45T | 22000 | 12000 | 10000 | 21300 | 16000 | 14000 | 17000 | 0.5-1 | 20T |
| 40-50T | 24000 | 13000 | 11000 | 23000 | 17900 | 15200 | 18100 | 0.5-1.1 |
Long Reach Kits Are Fully Compatible with ZHONGHE Excavator
Standard Buckets, Cylinder
| Excavator long boom | Excavator long arm | Standard bucket |
| Linkage kit | Bucket cylinder | Butter hose |
| Pin | Lubricatiing system | Seals |
Recommended Excavator Attachments
1. Long reach excavator boom
2. Excavator telescopic boom
3. Demolition boom
4. Excavator rock bucket
5. Excavator tilting bucket
6. Hydraulic grabs for excavators
FIRST--CORE CRAFT TECHNOLOGY
1. Less maintaince
Using high quality materials, such as Q355B as default, Q690D
optional, Niningbo connectors, seamless precision piplines,
graphite alloy copper sleeve, strong but light bucket cylinder.
2. Strong and sturdy
Built-in reinforcing ribs. Professional welding skill towards
different bearing position. Groove preparation(45° edge-mining)
before welding.
The pictures of excavator long arm for caterpillar
FAQ of Long Reach Excavator Boom
Q1: Why not have boom and stick cylinders in the plan?
A1: First, the whole long arm is lengthening, but the boom just
lengthening from its middel sleeve to its end, so the original boom
and stick cylinder can be used. Second, using the original parts
can save your cost.
Q2: How long is the boom arm can min excavator be be configured
with? Whether it is necessary to increase the counterweight?
A2. Generally speaking, 30-40 excavator longest arm suggests to be
8 meters, can configure 0.1 cbm bucket, no need extra
counterweight. 55 excavator longest arm suggests to be 12 meters,
can configure 0.1-0.15 cbm bucket, need 0.5 ton extra
counterweight. 60-80 excavator longest arm suggests to be 12
meters, can configure 0.15-0.25 cbm bucket, need 0.5-0.7 ton extra
counterweight.
It is not recommended to extend boom arm to longest length as min
excavator is easy to sloshing.
Q3: How long will it takes to install a excavator long reach boom?
It depends on the installer and machine size.
Usually disconnect the original boom arm, stick cylinder, then pin
the new one is okay.
Kindly remind, prepare several containers to fill the oil before
disassemble.
