Two Component Aliphatic Chemically Cured Polyaspartic Floor Coating
Product Descriptions:
Product Name | Polyaspartic Concrete Coating |
Drying time (25℃) | Touch dry≤2 hours / Hard dry≤12 hours |
Viscosity (25℃), cps | Part A 200, Part B 250 |
Solid Content, % | 100 |
Hardness, shore D | ≥50 |
Coverage (advise 2 coats) | 0.3kg/sqm per coat |
Quick Details:
Polyaspartics provide similar performance as a polyurethane coat
but at a higher level. It's also a low-to-zero volatile organic
compound (VOC), so the cure time is significantly faster.
Its flexibility, protective strength, and chemical resistance make
this a popular choice for:
Garage floors: offer great resistance to oil, grease, and gas.
Industrial applications: Including pipes, pipelines, coatings,
sewer linings, tank linings, and water treatment plants.
Automotive refinish and molded parts industry: (due to its fast
cure time, even at ambient temperatures)
Features:
1. Fast cure times with excellent adhesion
2. Low Odor, No VOC
3. Superior chemical resistance
4. Superior abrasion resistance
5. Nonyellowing and good gloss retention
6. Easy to mix 1:1 ratio by volume
Advantages:
The cross linking of the Polyaspartic series film in the cure makes
it exceptionally tough and durable, making it four times more
abrasion resistant than normal epoxy. The chemistry is based upon
polyaspartic and much attention has been given to the application
and installation attributes in its formulation. As a result, the
Polyaspartic clear topcoat is extremely user friendly without
having sacrificed the performance of the finished floor coating
product. The applications for this product are almost limitless.
Polyaspartic is suited for use on high-end residential flooring
applications, retail floor settings with high traffic, or food
service floor areas where stain resistance and cleanability are
paramount.
