Custom CNC Service Machining Aluminum Adapter For Skateboard
CNC machining technology introduction |
CNC machining is a traditional machining process that uses excess
material to remove excess material. CNC processing speed is fast,
the cost is low, the processing material has the characteristics of
high strength, high-temperature resistance, high toughness, etc.The CNC processing model processing forms are eclectic, such as
grinding, polishing, oxidation, paint spraying, sandblasting,
screen printing, UV(especially for models that require
electroplating), the effect of which can be comparable to or even
higher than the products produced by the mold; in appearance,
assembly, and functional verification, the final design intent of
the customer can be achieved. Therefore, CNC machining model
production has become a modern One of the mainstream of processing. Other Topic: |
What kind of parts are suitable for precision machining? Yixin
Precision will explain to you:
Compared with ordinary lathes, CNC lathes have constant linear
speed cutting function. The end face of the car and different
diameter of the outer circle can be processed at the same linear
speed to ensure that the surface roughness value is constant and
relatively small. Ordinary lathes are of constant speed and the
cutting speed of different diameters is different. When the
material of workpiece and tool, finishing allowance and tool angle
are safe, the surface roughness depends on the cutting speed and
feed speed.
When processing surfaces with different surface roughness, low feed
rate is selected for the surface with small roughness, and high
feed rate is selected for the surface with high roughness, the
variability is very good, which is difficult to achieve on ordinary
lathes. CNC precision machining has arc interpolation function,
which can process various complex contour parts. For the parts with
complex contour shapes, any plane curve can be approximated by
straight line or arc.
Service We Provide:
fine sandblasting parts
knurling parts
CNC engraving parts
powder coating parts
CNC machining parts
bending parts
4-axis CNC machining parts
anodize finished partsSurface treatments we can do:
Most CNC factories only focus on CNC machining, but are not good at
surface treatment. If the surface treatment of parts does not meet
expectations, it will not only increase the cost, but also affect
the time to market of products.
YMP has rich experience in surface treatment of metal parts, and we
will choose suitable surface treatment process according to
different parts materials and uses.
The common surface treatments of YMP include: electroplating,
electrophoresis, painting, powder spraying, sand blasting,
polishing, shot blasting, laser engraving, etching, CD pattern,
silk screen printing, wire drawing, blackening, anodizing, hard
oxidation, thick film oxidation, micro-arc oxidation and so on. No
matter what personalized requirements your parts need, we can meet
them.
blackening
CD pattern
Electroplating
mirror finish
powder coating
etching
blasting
anodizingMaterials we used for CNC machining parts:
There are various parts that can be processed by CNC, involving a
wide range of industries.
YMP has many years of experience in making OEM parts, and there are
475 kinds of materials. Basically, we can process all the metal
materials in the market, and we are equipped with spectrometers to
ensure the authenticity of the materials. So you don't have to
worry about material problems when you choose YMP. We have stocks
of aluminum alloy, stainless steel, magnesium alloy, titanium
alloy, zinc alloy, nickel alloy, copper, steel, and so on.
aluminum alloy parts
brass parts
stainless steel parts
titanium alloy parts
