FR NBR Rubber Diaphragm Seal For Dust Removal Equipment Solenoid
Valve Diaphragm
Brief introduction of electromagnetic pulse valve diaphragm:
The electromagnetic pulse valve diaphragm is a whole piece of
rubber diaphragm installed with a riveting head used to block the
compressed air pipeline or the air outlet of the blocking valve, a
venting unloading hole and a bolt hole for fixed support around it.
It is the key control part in the electromagnetic pulse valve.
Working principle:
The electromagnetic pulse valve diaphragm divides the pulse valve
into two air chambers. When the pressure of the rear air chamber
makes the diaphragm close to the air outlet of the valve, the pulse
valve is in a closed state, the pulse controller outputs a signal
to move the armature of the pulse valve, the vent hole of the air
chamber behind the valve is opened, and the rear air chamber
quickly loses pressure, making the The diaphragm moves backward,
the compressed air is blown through the outlet of the valve, the
pulse valve is in the open state, the injection starts, the
electrical signal output by the pulse controller disappears, the
electromagnetic pilot of the pulse valve is reset, the vent hole of
the rear air chamber is closed, and the back When the pressure of
the air chamber rises, the diaphragm of the pulse valve is close to
the air outlet of the valve, the pulse valve is in the closed
state, and the injection stops. The length of the injection time is
controlled by the controller.
ZCK pilot solenoid valve rubber diaphragm is a brand of functional
rubber diaphragm, which belongs to the special rubber diaphragm of
ZCK solenoid valve. ZCK solenoid valve diaphragm is one of the most
commonly used in the market. Rubber, etc.
| Product Materials | NBR,NR |
| Operating Temperature | -20℃~80℃ |
| Service Life | ≥1000000 times |
| Usage Scenario | Bag filter devices /precipitator equipment |
Rubber cloth diaphragm:
In the rubber diaphragm crowd, people are accustomed to refer to
all diaphragms as cloth diaphragms. Indeed, most of the rubber
diaphragms now have cloth interlayers, but there are also a small
number of diaphragms that are purely rubber-like. The pure rubber
diaphragm also has its own advantages compared with the rubber
cloth cloth diaphragm. For example, in terms of processing
technology, the pure rubber diaphragm can be thinner than the
rubber cloth cloth diaphragm. Under some special environmental
requirements, it can only be produced without adding cloth, and the
disadvantage is itself In the case of already very thin, if the
ambient frequency or pressure is high, the service life of the
diaphragm may be affected. The advantages of the rubber cloth
diaphragm are obvious. Although the pure rubber diaphragm can be
processed thinner, the rubber cloth diaphragm in the modern
development, because of the upgrading and progress of the
technology, like the rubber cloth cloth type rubber film. The
thickness of the film can also be controlled at 1.2mm, and the
1.2mm rubber cloth diaphragm is no problem in most industrial
environments.
Our service:
1. Packaging is neutral packing or customized packing.
2. We will reply you within 24 hours.
3. We will also provide you with good after-sales service.
4. OEM or ODM orders are welcomed.
5. Trial orders are acceptable.
6. High quality and factory price.
7. 100% ensured the quality.
