Trw Ross Mg-06-13-10 Low Speed High Torque Motor , Auger Motor

Ross Hydraulic Motors low speed high torqmotor TRW Ross MG-06-13-10 auger motor

Ross Hydraulic Motors is one of the best-selling hydraulic products that Hanjiu currently sells. This product has a wide range of applications, such as winches, crane drives, wheel motors for military vehicles, self-propelled cranes, excavators, conveyors and feeders. drive,Mixer and agitator drives, drum drives for roller mills, digesters, etc., etc. In addition, Ross Hydraulic Motors is small in size and precise in structure, which is very easy to install. One person can complete the installation work.

The Ross Hydraulic Motors produced by Hanjiu has a displacement of 200 ml, a normal oil temperature of -35°C to 80°C, a viscosity of 42 to 74 mm/s, a maximum speed (rpm) of 330 rpm continuously/425 rpm intermittently, and a maximum torque ( Nm): 530 Nm in continuous state and 600 Nm in intermittent state; the maximum output power (kW) of the product is 15.5 kW in continuous state and 18 kW in intermittent state.

Ross Hydraulic Motors is made of cast iron and steel as a whole, so it is strong enough, not prone to damage, and has a long service life.

Main Specifications:

Similar products:

In general, the advantages of Ross Hydraulic Motors produced by Hanjiu are obvious, which can be summarized as follows:

1. The Geroler gear set adopts advanced manufacturing equipment, with low starting pressure, stable and reliable operation and high efficiency.

2. The output shaft is adapted to needle roller bearings, allowing high axial and radial forces. Housing provides high pressure and high torque capability in a wide range of applications

3. Advanced high-speed distribution design can automatically compensate for high volumetric efficiency and long life in operation, providing stable and reliable operation

4. Low leakage rate, the most accurate timing method. The commutator speed is 6 times faster than the shaft speed. It enables distribution in a high precision to reduce life cycle cost, 5, maintains high volumetric efficiency, and can run very smoothly, low speed, gearbox is not needed.

In addition, the quality of Ross Hydraulic Motors produced by Hanjiu is good enough to 100% replace the products of internationally renowned brands such as Parker, White and Danfoss. This is not only because Hanjiu has always adhered to the production concept of quality first, but also because Hanjiu has taken action and adopted a series of measures to ensure product quality. For example, each item provided by "Hanjiu" will be tested in its test factory. At least two tests; each item provided by "Hanjiu" will be accompanied by a quality certificate; if there is any fault or defect in the contract, Hanjiu will provide products, parts and services free of charge; in addition, all products produced by Hanjiu are With a one-year shelf life, you can use and buy with confidence.

Hanjiu has been specialized in the production of hydraulic products for more than ten years. They have rich production experience, a complete range of products, fast service, quick response within 24 hours, and after-sales service is also in place.

ross hydraulic motor identification

ross hydraulic motor seal kit

ross hydraulic motor parts

ross hydraulic motor distributors

ross torqmotor mb series

ross torqmotor cross reference

trw ross hydraulic motor cross reference

ross torqmotor identification

Shijiazhuang Hanjiu Technology Co.,ltd. is a professional manufacturer of industrial hydraulic components, located in China - Hebei City. Since 1995, Hanjiu focused on the development and production of full series of hydraulic components, orbit motors, steering orbitrols, directional control valves.

Our products include: GEROLER and GEROTOR motors, hydraulic steering units, directional control valves. More than 50 series, 2000 types. Personalized products and services to provide customers with a significant advantage. Due to the high quality of our products and reliable performance, they are widely used in mobile, industrial, fluid power, dynamic, agricultural, construction, marine, automation, transport, sanitary, etc.

Hanjiu Technology brings together the world's top professional talent and technology, has a highly qualified international personnel. Set from software development to hardware design, system testing, technical services are completed by professional and technical personnel. We have R & D base in Hebei, well-known institutions of higher learning and research institutions at home and abroad, work closely with national patent applications for 63, a number of the core technological achievements and technical indicators at the international advanced level.

To ensure the quality and stability of the machine, we use the most advanced production and testing equipment to check the quality and performance of our hydraulic motors and steering units and valves in each production step to ensure our hydraulic components perfect quality and stable performance.

We provide customers with affordable, high-quality hydraulic components. In order to achieve the advantages of Asia, the full benefit in terms of quality and cost, procurement of key machine from Germany, and the production and manufacturing in China. We have the best supply chain in China and parts manufacturers, and a solid record of quality and innovation, to prove that our 20+-year performance of the hydraulic components

Quality product performance and good reputation, our products are not only successful sales in China, and have been exported to more than 120 countries and regions in the world, including: Germany, Japan, Italy, Spain, Poland, Russia, Belarus, South Korea, Turkey, Egypt, Brazil, Argentina, Chile, India, Australia, the United Arab Emirates, Saudi Arabia, USA, Mexico and other countries, the products are subject to a great welcome and praise.

Our goal is simple: to sell the best hydraulic motors, steering units, valves, components at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business is Perfect Hydraulics, to help others achieve their goals.

For more detailed information on our hydraulic components, please do not hesitate to contact us! We welcome your inquiries, and look forward to working with you.