AISI 303Pb Steel Forging Parts ASTM XM-3 UNS S30360 Machined
Description
AISI 303Pb Steel Forging Parts ASTM XM-3 UNS S30360 Machined is a
free machining stainless steel. Due to the addition of sulfur this
ph18-8 chrome nickel stainless steel has enhanced machinability
where before it was tough and difficult to machine. AISI 303Pb
Steel Forging Parts ASTM XM-3 UNS S30360 Machined is widely used in
the screw machine industry, as well as for use in shafts, valves
and fittings. AISI 303Pb Steel Forging Parts ASTM XM-3 UNS S30360
Machined is not recommended for vessels containing gases or liquids
under high pressure.
All of AISI 303Pb Steel Forging Parts ASTM XM-3 UNS S30360 Machined conform to Military standard, nuclear power. 100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal, AISI 303Pb Steel Forging Parts ASTM XM-3 UNS S30360 Machined
- Shape:Steel Forging Parts
Forging piece: stepped shafts with flanks / discs /tubes /slugs
/donuts /cubes /other different shapes based on OEM.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X
L1000-12000mm
- Length: Fixed length or random length or based on the customer's
special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Products Details
AISI 303Pb Steel Forging Parts ASTM XM-3 UNS S30360 Machined
| Chemical Composition (weight%): | C (％): ≤ 0.15
Si (％): ≤ 1.00
Mn (％): ≤ 2.00
P (％)≤: 0.040
S (％)≤: 0.12 ~ 0.25
Cr (％): 17.0 ~ 19.0
Ni (％): 8.00 ~ 10.0
Mo (％): ≤ 0.60
Pb (％): 0.12 ~ 0.30 |
Mechanical Properties Under
Final Heat Treatment: | Tensile strength, σb/≥ MPa: 620
Yield strength, σ0.2/MPa: 241
Elongation, δ ≥(％): -
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 269 |
Applications:
AISI 303Pb Steel Forging Parts ASTM XM-3 UNS S30360 Machined used
most often in the screw machine industry, as well as for use in
shafts, valves and fittings, etc.
15-5PH Steel Forging Parts ASTM XM-12 UNS S15500 Machined
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of AISI 303Pb Steel Forging Parts ASTM XM-3 UNS S30360 Machined and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces, the appearance of both ends, bending, set
length, outer diameter and Wall thickness will be checked one by
one. You can rest assured that all products you receive from us are
reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
