Low Pressure Forward Metallurgy Centrifugal Ventilation Fans
Anticorrosion
Introduction
The 4-10 series centrifugal Fan can be used for indoor ventilation
in general factories and large buildings.
The converging and streamlined air inlet is made into a unitary
structure and bolted to the inlet side of the fan. A device for
regulating the flow of the fan, axially mounted in front of the air
inlet. The adjustment range is from 0° (full open) to 90°(fully
closed).
Detail introduction
The casing is a volute welded by ordinary steel plates.The casing
of a single suction fan is made in three different forms: The No. 8
to 12 casing is made into an integral structure and cannot be
disassembled; The No. 14 to 16 casing is made into a two open
structure; The No. 18~29.5 casing is made into a three open
structure.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
|---|
| 4-10 | 8C | 1450 | 2104～1400 | 16156～30993 | 18.55 |
| 9C | 960 ~ 1450 | 775 ~ 2668 | 15229 ~ 44128 | 11 ~ 37 |
| 10C | 730 ~ 1450 | 553 ~ 3301 | 15886 ~ 60533 | 7.5 ~ 55 |
| 11C | 730 ~ 1450 | 669 ~ 4003 | 21144 ～ 80570 | 11 ~ 90 |
| 12C | 730 ~ 1450 | 797 ~ 4777 | 25661 ~ 104600 | 15 ~ 132 |
| 14C | 730 ~ 1450 | 1086 ~ 6541 | 43591 ～166100 | 37 ~ 315 |
| 16C | 580 ~ 960 | 895 ~ 3709 | 51699 ~ 164150 | 45 ~ 185 |
| 18C | 580 ~ 960 | 1133 ~ 4710 | 73610 ~ 233730 | 75 ~ 280 |
| 20C | 580 ~ 960 | 1400 ~ 5837 | 100970 ～ 320610 | 110 ~ 520 |
| 22C | 480 ~ 960 | 1216 ~ 6865 | 116000 ～ 434000 | 140 ~ 850 |
| 25C | 480 ~ 730 | 1579 ~ 5138 | 171000 ～ 484000 | 165 ~ 700 |
| 28C | 375 ~ 730 | 1205 ~ 6400 | 187000 ~ 680000 | 320 ~ 1250 |
| 29.5C | 596 ~ 745 | 3236 ~ 7218 | 348000 ~ 810000 | 800 ~ 1600 |
Product Features
This series of fans can also be used for dust removal, mine
ventilation and general ventilation systems. The blower delivers
air, and the induced draft fan delivers flue gas or gas containing
foreign particles.
It can be used for more than four years when the concentration of
impurities is less than 200 mg/m3.
If it contains a lot of impurities, it also can be used, but it
will shorten the service life.
FAQ
1,What parameters need to be provided when you design the
industrial centrifugal fans?
A: Air flow, total pressure or static pressure, inlet temperature,
local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2,How about your company’s pre-sales service and after-sales
service?
A: Before our cooperation, we have the professional technical team
to help you make the technical solution according to your working
condition, to make sure the centrifugal fan efficiency operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3,Does your company have qualifications?
A: SIMO Blower has obtained ISO 9001-2008, CE, TUV certifications
and so on.
