Medium Frequency Induction Heating Equipment Automatic Temperature
Control Induction Heating Equipment
Product introduction of intermediate frequency induction heating
equipment:
For example, if a metal cylinder is placed in an induction coil
with alternating intermediate frequency current, the metal cylinder
is not in direct contact with the induction coil, and the
temperature of the energizing coil itself is very low, but the
surface of the cylinder is heated to redness or even melting, and
the speed of redness and melting can be realized by adjusting the
frequency and the strength of the current. If the cylinder is
placed in the center of the coil, the temperature around the
cylinder is the same, and the heating and melting of the cylinder
do not produce harmful gas or strong light to pollute the
environment
Technical parameters of high frequency induction heating equipment:
Model: LC-ZP-145KW
Maximum input current: 145A
Input power: 145kW
Oscillation frequency: 15khz
Input voltage: 360v
Host volume:357mm×3567mm×487mm
Cooling water pressure: 0.1-0.3mpa
Cooling water flow (main engine): 15L / min (0.1MPa)
Cooling water flow (transformer): 18L / min (0.1MPa)
Water temperature protection point: 50 ℃
Host weight: 40 ± 5% kg
Efficiency: 90%
Application fields of medium frequency induction heating equipment:
1. Welding: cutting tools, drilling tools, cutting tools,
woodworking tools, turning tools, drill bits, brazing, reamers,
milling cutters, drill bits, saw teeth, lens frames in the eyewear
industry, welding of steel pipes and copper pipes, pick welding,
welding of the same and different metals, compressors, pressure
gauges, relay contact points, composite welding of different
materials at the bottom of stainless steel pots, welding of copper
wires in transformer windings Storage (welding of gas filling
nozzle, stainless steel meal and kitchen utensils).
2. Heat treatment: quenching and annealing of gears, machine guide
rails, hardware tools, pneumatic tools, electric tools, hydraulic
parts, ductile iron, auto and motorcycle parts, internal parts and
other mechanical metal parts (surface, internal hole, local and
overall), and stretching of stainless steel pot products.
