ELECMAN ® Zinc Liquid Tight Connector Straight Flexible Conduit To
Box Type
Applications
ELECMAN® Zinc liquid tight connector straight flexible conduit to box type are used to terminate and seal liquid tight flexible metal conduit
to either oli tight, liquid tight or rain tight box or enclosure,
connectors can be used with tapered thread female entry or
unthreaded knockout using the provided sealing washer and locknut.
Features
- Insulated throat protects against abrasion damage.
- Assembled with zinc die cast locknut, insulated throat and sealing
washer.
Sealing washer provides a liquidtight seal when terminating the
connector in a threadless opening.
Liquidtight, raintight, oiltight for protection and long life in
wet, dusty and corrosive environments.
Hex shaped gland nut allows for easy wrenching, providing a fast,
tight installation.
Reusable, long ferrule prevents pull-out and tight bend conduit
pop-out.
Available in straight and 90 degree configurations.
Available in insulated and non-insulated versions to meet any
customer preference.
Certifications and Compliances
ELECMAN® Zinc liquid tight connector straight flexible conduit to
box type shall be produced to the following specification:
- UL Listed liquid tight flexible metal conduit fittings are suitable
for use in the following hazardous locations under NEC:
- Class I, Division 2;
- Class II, Divisions 1 & 2;
- Class III, Divisions 1 & 2;
- Suitable for grounding in sizes 3/8” through 1-1/4” under NEC
- UL Standards 514B, 467
- cUL Standard C22.2 No. 18F
- UL File No. E503810
Specification Data
ELECMAN provides full size zinc liquid tight connector straight flexible conduit to box type from 1/2" to 4".
| CAT # | Trade Size | DIM A(inch) | DIM B(inch) | DIM C(inch) | DIM D(inch) | INNER PACK | MASTER PACK | WEIGHT PER C |
| LTS038 | 3/8" | 1.070 | 0.960 | 0.620 | 0.470 | 100 | 500 | 14.5 |
| LTS050 | 1/2" | 1.070 | 1.080 | 0.620 | 0.470 | 100 | 500 | 15.5 |
| LTS075 | 3/4" | 1.070 | 1.330 | 0.820 | 0.470 | 100 | 250 | 15.5 |
| LTS100 | 1" | 1.340 | 1.563 | 1.020 | 0.570 | 50 | 200 | 15.5 |
| LTS125 | 1-1/4" | 1.150 | 1.940 | 1.360 | 0.710 | 40 | 100 | 15.5 |
| LTS150 | 1-1/2" | 1.520 | 2.190 | 1.600 | 0.710 | 20 | 50 | 14.5 |
| LTS200 | 2" | 1.540 | 2.660 | 2.070 | 0.710 | 10 | 50 | 15.5 |
| LTS250 | 2-1/2" | 2.200 | 3.280 | 2.510 | 1.060 | 10 | 25 | 14.5 |
| LTS300 | 3" | 2.220 | 3.800 | 3.130 | 1.060 | - | 20 | 17.5 |
| LTS350 | 3-1/2" | 2.360 | 4.280 | 3.580 | 1.060 | - | 20 | 17.5 |
| LTS400 | 4" | 2.440 | 4.780 | 4.050 | 1.060 | - | 10 | 17.5 |
Quality Control
ELECMAN QC department pay much attention to controlling the
quality, the main part of the connector body is made of high
quality zinc, the screws are made of steel, every part of the
connector are produced according to the high standard.
Packing Information
Packing is so important, good packing can help customers to improve
the brand image, good packing also can help customers to stock the
products well for longer time, so ELECMAN pay much attention to
that, for flexible conduit fittings, from 1/2" to 1", ELECMAN
provides inner box packing inside the outer box, from 1-1/4" to 4",
ELECMAN provides plastic packing inside the outer box.
