ELECMAN ® Malleable Iron Liquid Tight Connector 90 Degree Type With
Grounding Lug
Applications
ELECMAN® Malleable iron liquid tight connectors 90 degree type also
named liquid tight conduit fittings (or seal tight connector), it
was usually installed with the flexible conduit as the seal tight
fittings to ensure the waterproof degree. The liquid-tight
connector designed to connect flexible metallic liquid tight
conduit ensuring IP67 or IP68 waterproof degree protection for the
junction box, equipment, and other electrical enclosures.
Features
- Tapered threaded male hub NPT.
- Compact, slim diameter with small turning radius.
- Furnished with an insulated throat with steel locknut and sealing
ring.
- Liquidtight, raintight, oiltight for protection and long life in
wet, dusty and corrosive environments.
- Suitable for wet locations.
- Reusable, long ferrule prevents pull-out and tight bend conduit
pop-out.
- Available in both malleable iron and aluminum construction with the
option of a ground lug pre-attached.
- Available in straight, 90 and 45 degree configurations.
- Available in insulated and non-insulated versions to meet any
customer preference.
Certifications and Compliances
ELECMAN® Malleable iron liquid tight connector 90 degree type with
grounding lug shall be produced to the following specification:
- UL Listed liquid tight flexible metal conduit fittings are suitable
for use in the following hazardous locations under NEC:
- Class I, Division 2;
- Class II, Divisions 1 & 2;
- Class III, Divisions 1 & 2;
- Suitable for grounding in sizes 3/8” through 1-1/4” under NEC
- UL Standards 514B, 467
- cUL Standard C22.2 No. 18F
- UL File No. E503810
Specification Data
ELECMAN provides full size malleable liquid tight connectors 90
degree type with grounding lug from 3/8" to 4".
| CAT # | Trade Size | DIM A(inch) | DIM B(inch) | DIM C(inch) | DIM D(inch) | INNER PACK | MASTER PACK |
| ALTN038 | 3/8" | 1.313 | 0.500 | 1.125 | 0.750 | 50 | 250 |
| ALTN050 | 1/2" | 1.438 | 0.500 | 1.250 | 0.750 | 50 | 250 |
| ALTN075 | 3/4" | 1.625 | 0.500 | 1.563 | 0.750 | 50 | 250 |
| ALTN100 | 1" | 2.313 | 0.625 | 1.813 | 0.750 | 40 | 200 |
| ALTN125 | 1-1/4" | 2.375 | 0.688 | 2.250 | 0.750 | 20 | 100 |
| ALTN150 | 1-1/2" | 3.063 | 0.750 | 2.438 | 0.750 | | 80 |
| ALTN200 | 2" | 3.188 | 0.750 | 3.000 | 0.750 | | 50 |
| ALTN212 | 2-1/2" | 8.313 | 1.000 | 4.000 | 1.125 | | 25 |
| ALTN300 | 3" | 9.813 | 1.125 | 4.188 | 1.125 | | 15 |
| ALTN350 | 3-1/2" | 11.188 | 1.188 | 5.250 | 1.500 | | 10 |
| ALTN400 | 4" | 12.563 | 1.250 | 5.750 | 1.500 | | 5 |
Quality Control
ELECMAN QC department pay much attention to controlling the
quality, the main part of the connector body is made of high
quality malleable iron, the screws are made of steel, the grounding
lug is made of aluminum, every part of the connector are produced
according to the high standard.
Packing Information
Packing is so important, good packing can help customers to improve
the brand image, good packing also can help can help customers to
stock the products well for longer time, so ELECMAN pay much
attention to that, for flexible conduit fittings, from 1/2" to 1",
ELECMAN provides inner box packing inside the outer box, from
1-1/4" to 4", ELECMAN provides plastic packing inside the outer
box.
