Synthetic Drugs Vacuum Drying Machine 40L Max Loading Capacity

40L Max loading Capacity Synthetic Drugs Vacuum Drying Machine

Hot medium is put into the jacket for drying, heat exchange is done between the inner wall and materials. After the materials absorb heat, water is evaporated. The evaporated moisture and other gas is exhausted from vacuum pipe by vacuum pump. In the tank it is vacuum state and the rotary of tank makes the materials overturn continuously, so the drying speed is fast and drying intensity is increased, and can achieve the purpose of uniform drying. It is a new style dryer that combines mixing and drying together. It can be used together with condenser and vacuum pump. (If do not need to recover solvent, condenser is not needed).

Working Principle

Put the material in the vacuum and heat the material indirectly by the fixture coat. When dried, it rotates slowly, and refreshes the heating surface continuously to enhance the dry speed. The vacuum pump can absorb the moisture continuously and the steam impregnate can be reclaimed by the cooler. In the closed sandwich through the heat energy (such as hot water, low pressure steam or heat transfer oil), the heat through the inner shell to the dry material. In the power-driven, the tank for the slow rotation, the contents of the tank are constantly mixed, so as to achieve the purpose of strengthening the dry. Material in a vacuum state, the vapor pressure drop on the surface of the material moisture (solvent) to saturation and evaporation, and timely discharge by the vacuum pump recovery. Material within the water (solvent) continue to surface penetration, evaporation, discharge, the three processes continue, the material in a very short period of time to achieve the purpose of drying.

Product Application

The machine can mix and dry the powder, crystal material and granule material in chemical industry, pharmaceutical industry, foodstuff industry, metallurgy industry, construction, etc. It can also be used for the concentration of the liquor, disinfection and germicide of the material. The moisture of the material can be dried to be lower than 0.5%.

The machine can save energy sources with low labor and high efficiency, and it only needs 2-4 hours to dry the material (<40% humidity).

Technical Parameters

Model	100	350	500	750	1000	1500	2000	3500	4500	5000
Volume inside of tank(L)	100	350	500	750	1000	1500	2000	3500	4500	5000
Max loading capacity(L)	40	140	200	300	400	600	800	1400	1800	2000
Max loading weight(kg)	20	70	100	150	200	300	400	700	900	1000
Revolution(rpm)	3-13					6	5	4	4	4
Heating area(M2)	1.1	2.3	2.8	3.9	5.1	6.5	8.2	12.2	16.5	18.2
Motor power(kw)	0.75	1.1	1.5	2.2	3	4	5.5	7.5	11	15
Occupied area(mm)	2160*800	2160*800	2350*800	2560*1000	2860*1300	3060*1300	3260*1400	3760*1800	3960*2000	4400*2500
Rotating height(mm)	1750	2100	2250	2490	2800	2940	2990	3490	4100	4200
Design pressure of tank(Mpa)	-0.1~0.15
Desing pressure of jacket(Mpa)	<0.3
Weight(kg)	800	1100	1200	1500	2800	3300	3600	6400	7500	8600

Schmatic of Installation

Product Show

Contact Me

electrical, steam, natural gas or other

Jiangsu Guojin Drying Technology Co.,Ltd. specializes in the research and development and manufacture of drying, mixing, granulating, crushing, conveying, screening and other equipment. It has now become a large-scale enterprise in the drying equipment industry and a designated production enterprise of China Chemical Equipment Corporation. Especially, it has unique advantages in mesh belt type, hollow blade, disc type, rake type, fluidized bed, flash evaporation, airflow, spray, vacuum drying equipment, calcination, etc. Widely used in chemical, pharmaceutical, food, environmental protection, building materials, electronics, feed and other industries. Tens of thousands of users are spread all over the country and sold to more than then countries.

The company is located in Sanhekou Development Zone, Tianning District, Changzhou City, the birthplace of China's drying equipment industry. It is adjacent to Beijing-Shanghai Expressway, Shanghai-Nanjing Railway and Hengshan Crossing of Shanghai-Nanjing Expressway, 5km away from Shanghai in the east, Wuxi and Suzhou in the south, and the Yangtze River in the north.

The company has complete processing equipment. There are several sets of manufacturing equipment such as lifting, welding and cutting. It has excellent product development environment and production environment. The company has adopted advanced management methods and established a perfect quality assurance system.

Our company has established a set of perfect after-sales service system, which tracks and monitors all ex-factory products and the users are satisfied. "work with great care and keep improving" is the company's requirement for emplyees. Facing the increasingly standardized domestic and foreign markets, the company adheres to the corporate philosophy of "open competition, cooperative innovation, balance of interests and common development" and faces up to challenges with the belief of winning.