High-strength pressure-resistant multilayer stainless steel
sintered mesh
Product Description
The sintered web is made from one or more layers of woven wire mesh
by a "sintering" process. The single layer woven wire mesh is first
evenly flattened to ensure good contact at the intersection of the
wires. The single or multiple layers of the calendered web are then
laminated under mechanical pressure in a high temperature furnace
by a special clamp filled with a proprietary embedded gas and the
temperature is raised to the extent that sintering (diffusion
bonding) occurs. After controlling the cooling process, the mesh
becomes more rigid because all the contact points of the individual
wires are bonded to each other. Sintering improves the properties
of the woven wire mesh by a combination of heat and pressure.
The sintered mesh may be a single layer or a plurality of layers,
and a layer of perforated metal may be added to strengthen the
entire structure according to filtration requirements. More
importantly, the sintered mesh can be cut, welded, pleated, rolled
into other shapes such as discs, plates, ink cartridges, and
tapered. Compared with the traditional wire mesh, the sintered mesh
has outstanding advantages, high mechanical strength, high
permeability, reduced pressure, wide filter range and easy
backwashing. Although the cost seems to be higher than the
traditional filter, its long service life and excellent performance
have gained more popularity and obvious advantages.
Our main products include
Five-layer sintered mesh
Sintered mesh laminate
Sintered mesh with perforated metal
Sintered metal filter
Sintered metal filter disk
Folded sintered mesh filter
Sintered cone filter
Sintered metal fiber felt.
Product Feature
High mechanical stability
High mechanical stability rating
No displacement in the wire cloth structure
High filtration capacity due to surface filtration
Corrosion-resistant, wear-resistant, can work in the temperature
range of -50 ° C to + 550 ° C.
The sintered mesh can be made into a filter candle, a circle, a
disk or the like as needed.
Specification list
| Product name | Sintered Wire Mesh 10 micron Pressure Resistant Plain Weave High
Strength |
| Material | 304 wire mesh |
| Key word | stainless steel sintered mesh |
| Application | Filter |
| Filter rate | 1-100um |
| Technique | Woven |
Product Application
• High viscosity liquid filtration, such as polymers and adhesives
• Hot fluid filtration
• Oil filtration, such as lubricating oil and turbine oil
• Fluid food filtration, if juice, cooking oil and vinegar
• Dewatering of sludge, food, etc.
Product Parameters
Note: This list for a reference, not for the complete list.
Nomin al filter rating | structure prodextive layer+control layer +dispersion layer+ reinforce layer+ reinforce layer | Thickness (mm) | air perm eabilit | Bubble pressure (mm) | weight (kg/m2) | porosity (%) |
| 1 | 100+400*2800+100+12*64+64 | 1.7 | 1.81 | 360-600 | 5 layer 8.4 | 40% |
| 5 | 100+200*1400+100+12*64+64 | 1.7 | 2.42 | 260-550 | 6 layer 14.4 | 40% |
| 20 | 100+165*800+100+12*64+64* | 1.7 | 4.5 | 170-450 | | 40% |
| 200 | 40+80+40+20+40+80+40 | 2 | 26 | 50-150 | | 40% |
