C22E Structural Steel Round Bar W-Nr-1.1151 Steels Ck22 Bar
Description
C22E Structural Steel Round Bar W-Nr-1.1151 Steels Ck22 Bar is a high quality Quenched and Tempered Mild Carbon Structural
steel, It belong to the high quality low carbon, Low carbon
chromium, molybdenum, nickel case hardening steel. C22E Structural Steel Round Bar W-Nr-1.1151 Steels Ck22 Bar Annealing delivery hardness less than 250HB.
All of C22E Structural Steel Round Bar W-Nr-1.1151 Steels Ck22 Bar conform to Military standard, nuclear power. 100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal, Structural Steel Round Bar, C22E Structural Steel Round Bar W-Nr-1.1151 Steels Ck22 Bar
- Shape:Structural Steel
- Round bar / Wire rod (Diameter): 5.5mm to 800mm
- Square bar / Flat bar: 3mm to 800mm
- Forging piece: stepped shafts with flanks / discs /tubes /slugs
/donuts /cubes /other different shapes based on OEM.
- Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X
L1000-12000mm
- Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 -
2000mm
|
Products Details
C22E Structural Steel Round Bar W-Nr-1.1151 Steels Ck22 Bar
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
C(％): 0.17～0.24
Si(％): ≤0.40
Mn(％): 0.40～0.70
P(％)≤: 0.035
S(％)≤: 0.035
Cr(％): ≤0.40
Mo(％): ≤0.10
Ni(％): ≤0.40 Cr+Mo+Ni≤0.63％ | Normalized condition +N
Tensile strength,Rm: >410 MPaThe yield point,Re: > 210
MPaElongation,A:> 24%
Heat-treated condition +QT
Tensile strength,Rm: 470 - 650 MPaThe yield point,Re: > 290
MPaElongation,A:> 20%
Contraction,Z: >50%
lmpact resistance,KV: > 50J |
Applications:
C22E Structural Steel Round Bar W-Nr-1.1151 Steels Ck22 Bar is often used in the connecting rods, connectors, shafts, overhead cranes, bolts, pins,
bushings, control shafts, axles, keys, rivets, wedges and hubs.
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of raw materials and test the finished products in
strict accordance with the standards stipulated in the contract. In
this process, the inner and outer surfaces, the appearance of both
ends, bending, set length, outer diameter and Wall thickness will
be checked one by one. You can rest assured that all products you
receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
