Impregnated Diamond Reaming Shell
As the core bit diameter and diameter of the core tube is very
small, so that the gap between the hole and the core tube is more
narrow, so that the water blocked which is easier to cause the
blocked drill. Reamer is a short columnar body, the upper and lower
part of the steel part of the thread with the drill bit and the
core tube connected to the middle part of the diamond is covered
with super-hard material, the outer diameter is slightly larger
than the diamond drill diameter (0.5 mm To about 2 mm), the carcass
side surface has a water way, so that water can pass through.
We accept the customized requirement from customers .
Our impregnated diamond core bits are the most commonly useful bits
in the mineral exploration industry, as they have the widest range
of application. The carefully selected grades of high quality
synthetic diamond are distributed in the depth of impregnated bit's
matrix series.
Our matrix height ranges from 6mm to 16mm.
| ITEM | DIAMOND BIT | REAMING SHELL |
"Q"
Series
Wireline | Size | Bit-set OD | Bit-set ID |
| mm | inch | mm | inch | mm | inch |
| AQ | 47.60 | 1.88 | 26.97 | 1.06 | 48.00 | 1.89 |
| BQ | 59.50 | 2.35 | 36.40 | 1.43 | 59.90 | 2.36 |
| NQ | 75.30 | 2.97 | 47.60 | 1.88 | 75.70 | 2.98 |
| HQ | 95.58 | 3.77 | 63.50 | 2.50 | 96.00 | 3.78 |
| PQ | 122.00 | 4.80 | 84.96 | 3.35 | 122.60 | 4.83 |
Swedish
Metric
T2
Series | 36 | 36.0 | 1.417 | 22.0 | 0.866 | 36.3 | 1.429 |
| 46 | 46.0 | 1.811 | 32.0 | 1.260 | 46.3 | 1.823 |
| 56 | 56.0 | 2.205 | 42.0 | 1.654 | 56.3 | 2.217 |
| 66 | 66.0 | 2.598 | 52.0 | 2.047 | 66.3 | 2.610 |
| 76 | 76.0 | 2.992 | 62.0 | 2.441 | 76.3 | 3.004 |
| 86 | 86.0 | 3.386 | 72.0 | 2.835 | 86.3 | 3.398 |
| 101 | 101.0 | 3.976 | 84.0 | 3.307 | 101.3 | 3.988 |
Swedish
T
Series | TAW | 47.6 | 1.875 | 23.2 | 1.31 | 48.0 | 1.89 |
| TBW | 59.5 | 2.345 | 44.9 | 1.77 | 59.9 | 2.36 |
Our Services:
Ø Provide the technical design and solutions;
Ø Designing and manufacturing of non-standard equipment;
Ø Professional technical training and guidance on site according to
the contract;
Ø Supply accessories at any time;
Ø Tele-technical consulting and services;
Ø Other special technical service according to client's
requirements.
We specialized in producing of varies diamond drilling tools, such
as impregnated/surface-set diamond core bits, diamond casing shoes,
diamond rod shoes, reaming shells, TC core bits/casing shoes/TC rod
shoes, PDC bits, Thin Wall Bits, core lifters, core lifter cases,
core barrels, and kinds of drilling rigs etc.
