When Internal Gear Pump is Operating- BJVP Internal Gear Pump
Overview:
Among the two gears, the internal gear is connected to the driving
shaft and power is transmitted to it. Therefore, the internal gear
is the driving gear and the external spur gear is the driven gear.
During the rotation of the two gears, they appear to be coming out
of mesh at the inlet port. This creates the suction and causes the
fluid to enter into the pump. The fluid is completely filled around
the crescent seal and the gear spaces. The rotation of gears
transfers the fluid from inlet port to outlet port.
Application:
Lubricants, Fuel Oil, Grease, Asphalt, Bitumen,
Gluse,Polymer,Resin,Chemical Fiber, Coatings, Detergents, High
viscosity product or high temperature product.
Parameters:
| Port size | 0.5”-10” |
| Capacity | 0.01～363 m3/h |
| Pressure range | 0.1～16 Bar |
| Temperature | -85～430℃ |
| Viscosity | 0.1～440, 000 cSt |
| Material | D.I ,WCB,304SS,316SS,316L,Duplex SS |
| Port Type | ASME or DIN Flanges ,NPT ,SAE ports |
Character:
Adjustable clearance, easy satisfied with the changable viscosity
;Enlarged seal chamber for multi type seal interchange ; Enlarged
bearing housing for quickly maintenance.
Available Solution:
Packing seal,Mechanical Seal,Cartridge type seal , all kinds of
seal types are interchangeable, enlarged bearing housing design for
future replacement and quickly maintenance.
Magnetic None Seal pump is also available.
Internal Safety valve , heating jacket,electric heating rod can be
supplied.
BJVP can provide a variety of material selection,working scope to
meet with application requirement.
Picture:
