SMT mounting machine apply to led light ,mounting machine apply to
led 3014,3020,3528,5050,resistor,bridgr rectfiers
Features
Apply to the 0.6 M, 0.9 M, 1.2 M rigid PCB and 0.5 M, 1 M LED
flexible strip. Producing with 4 types of materials at the same
time with high capacity. available for board with any proportion of
LED chip and resistor.
Dual arm four modul, 17 nozzles for each mounting part, part
A/B/C/D can be mounted separately or synchronously.
Calibration automatically, high precision, available for RGB.
Exclusive patent technology: Group to take and group to mount.
Technical parameter
Dimension:2700*2300*1550mm
Total Weight:1700kg
PCB Length Width:Max:1200*330mm Min:100*100mm
PCB Thickness:0.5-5mm
PCB Clamping:Adjustable pressure pneumatic
Mounting Mode:Group picking and group placing
Software:R&D independently
Mounting Speed:200000-25000CPH
Repeat mounting Precision:±0.02mm (Repeat precision)
Mounting Height:≦5mm
Components:LED 3014/ 3020/ 3528/ 5050 and capacitors, resistors,
bridge rectifiers, etc.
No.of camera:5pcs
Power comsumption:6KW
No.of head:68pcs
No.of feeder:68pcs
SMT LINE
Features:
1.high assembly density, small size and light weight of electronic
products, the size and weight of SMT components is only about 1/10
of the traditional plug-in components, after the general use of
SMT, electronic products reduce 40% ~ 60% of the volume, weight,
60% ~ 80% .
2.High reliability and anti-vibration ability. Low solder joint
defect rate.
3.Good High frequency characteristic. Reduced electromagnetic and
radio frequency interference.
4.easy to realize automation, improve production efficiency. Reduce
cost by 30% ~ 50% . Save material, energy, equipment, manpower,
time and so on.
Head
SMT nozzle, SMT SMT mounter is used to absorb and mount the actual
contact with the component part. There are size, the basis for its
classification is generally the size of its diameter.
1.Nozzle material:
(1) Plastic nozzle: plastic nozzle as the name suggests, the
material of the nozzle is made of plastic, this kind of nozzle is
suitable for the surface of electronic component uneven or sticky
electronic materials, the advantage of plastic nozzle is low cost,
but the rubber nozzle life is not long, the need for regular
replacement, it is recommended that the purchase of rubber nozzle,
Buy More rubber nozzle for use, when wear, can be replaced
directly.
(2)Diamond steel suction nozzle: the advantages of solid, durable
and easy to use, but expensive, cost-effective is not high.
(3)Tungsten steel suction nozzle: tungsten steel suction nozzle
strong, durable, but easy to whiten, but whitening on the oil pen
coating, but also continue to use.
(4)Ceramic nozzle: ceramic nozzle is not white, but very brittle,
easy to break.
2.Nozzle shape: suction nozzle shape has square hole, round, v
slot, common electronic materials are generally available on the
market, can be directly bought corresponding to the off-the-shelf
SMT machine can be, some board above will be used profiled parts or
large materials, it needs to be tailored to the electronic
component.
