Product name:
Low Voltage Insulation Cold Shrink Splice For Cable Protection
Description:
1, widely used in low-voltage cable terminal processing;
2, to maintain a constant tightening force, with the cable with the
breath, to ensure excellent interface characteristics.
3, advanced production technology, vacuum high pressure injection
vulcanization molding. Internal structure perfect, no defects, in
the 21KV below the Council put less than 1pc (8.7 / 15KV series).
4, without fire and special tools, and no gradually into the
trouble, just gently extract the core rope,
5, the use of imported liquid silicone rubber to ensure excellent
insulation and high flexibility, the installation of the cable body
has always been to maintain a constant radial pressure, local
discharge is small, with the cable body with the "breathing."
6, the terminal body with the cold shrink branch finger sets, cold
shrink insulation tube and cold shrink terminal seal tube;
intermediate connector with three waterproof sealing process to
ensure that the annex excellent sealing moisture resistance.
7, the installation is simple, the operation of the technical
dependence is low, easy to master.
8, anti-pollution, anti-aging, good hydrophobicity, with excellent
corrosion resistance, cold resistance and anti-ultraviolet, to
ensure long-term use of stable performance.
Products picture:
Introduction:
| Material technical parameters: |
| No | Items | Test method | Unit | Test standard | Remarks |
| 1 | Hardness (Shore A) | GB/T 531.1-2009 | Shore A | 43±5 | |
| 2 | Tensile strength | GB/T 528-2009 | Mpa | 8±3 | |
| 3 | Break elongation | GB/T 528-2009 | % | 800±200 | |
| 4 | Tear strength | GB/T 529-2008 | kN/mm | 38±5 | |
| 5 | Volume resistivity | GB/T 2439-2001 | Ω•cm | ≥1013 | |
| 6 | dielectric strength | GB/T 1695-2005 | MV/m | ≥18 | |
| 7 | dielectric Constant(50Hz) | GB/T 1693-2007 | / | ≤8 |
|
Here you can find cold shrink splice made of different materials
for base stations, silicone, EPDM and Silicone with Bilateral
Built-in Mastic. They can be used to connect cable to cable or
connect cable to device for waterproofing. 1/4" , 3/8" , 1/2" s,
1/2", 7/8”, LMR195 coaxial cable to 4.3-10, 4.1-9.5, 7/16DIN,
