Micro Compression Force Transducer 2lb Flanged Load Cell 5lb Column
Force Sensor 10lb
Flanged Micro Load Cell FCFK is made of stainless steel based on
strain gauge technology to deliver maximum 0.3% non-linearity of
the rated capacity. Flanged Miniature Compression Force Sensor FCFK
offers 0-2.2lb / 0-4.4lb / 0-11lb / 0-22lbf / 0-44lb / 0-112lb /
0-225lb / 0-450lb eight measuring ranges to choose from, flange to
flange mounting, compact design, you may find micro force
transducer FCFK applicable for compression force measurement
applications where mounting space is limited, such as fixture
clamping force measurement, assembly force monitoring, force
distribution test, force simulator, pinch force measurement, etc..
Miniature Flat Load Cell FCFK can also be modified or customized as
per client's request.
Dimensions(in milimeter)
| Ordering code | Measurement Range | Force direction |
| FCFK-10N | 0-10N / 0-2.2lb | Compression |
| FCFK-20N | 0-20N / 0-4.4lb |
| FCFK-50N | 0-50N / 0-0-10lb |
| FCFK-100N | 0-100N / 0-20lb |
| FCFK-200N | 0-200N / 0-45lb |
| FCFK-500N | 0-500N / 0-112lbf |
| FCFK-1kN | 0-1000N / 0-225lbs |
| FCFK-2kN | 0-2000N / 0-450lbf |
Specifications
| Capacity | 1kg / 2kg / 5kg / 10kg / 20kg / 50kg / 100kg / 200kg 2.2lb / 4.4lb / 11lb / 22lb / 45lb / 112lb / 225lbf / 450lbs
10N / 20N / 50N / 100N / 200N / 500N / 1kN / 2kN |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.03% R.O./oC |
| Input resistance | 385±50 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Miniature Compression Sensor 2lb 4lbs 11lb 22lb 45lbf 112lbs 225lbs
450lbf Force Measurement Transducer
Output signal of load cell FCFK:
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Micro Load Cell FCFK is normally around 2.0mV/V.
Power supply of Pinch Force Sensor FCFK is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of Compression Type Force Transducer FCFK is
normally within 0…+30mV.
Example one: Miniature Compression Sensor FCFK-10N with 2.0V/V
sensitivity powered by 5V DC,the output range is 0mV...+10mV.
Example two: Micro Compression Force Transducer FCFK-20N with
2.0mV/V rated output powered by 10V DC,the output range is
0mV...+20mV.
The mV/V output from the wheatstone bridge sometimes can hardly be
processed directly, a signal conditioner can be used with the load
cell to deliver 0~5V, 0-10V or 4-20mA output.
Example one: Micro Compression Force Sensor FCFK-50N working with amplifier FSC(0-5V)-24V,the Load-Voltage
relationship will be 0-50N compression force VS 0-5V output, which
is linear regardless of the measurement error, 1V output
corresponds to 10N compression load, 2V output corresponds to 20N
compression load, and so on.
Example two: Miniature Compression Force Transducer FCFK-50N
working with amplifier FSC(4-20mA)-24V,the Force-Current
relationship will be 0-50N compression force VS 4-20mA output,
which is linear regardless of the measurement error, 4mA output
corresponds to “0” load, 5.6mA output corresponds to 5N compression
load, 12mA output corresponds to 25N compression load, and so on.
Load cell FCFK can also work with digital indicator FPT to deliver
below functions:
-Display force value in real time
-Peak holding to grab the maximum force during testing
-RS485 or RS232 interface
-0-5V/0-10V/4-20mA analog output
-Switch output
Micro Compression Force Transducer 2lb Flanged Load Cell 5lb Column
Force Sensor 10lb
Click here to download
datasheet
