hot air circulation powder coating furnace
Exemplary Examples of powder coating oven
No. | Item | Description |
1 | Demension | External size: 6300mm(L)×3300mm(W)×3100mm(H);or as requirement Internal size: 6000mm(L)×3000mm(W)×2800mm(H) |
2 | Wall Panel | 150mm thick heating-resisting rock wool steel board, sandwich: Outside panel is 0.5mm thick colorful steel skin boards, and Inside panel is 0.5mm thick galvanized sheet plate. |
3 | Entrance Door | W3000mm×H2800mm or as requirement; Handiwork metal plate 2-door; Be equipped doorknob, etc. |
4 | Ground Rail | High quality steel rack; |
5 | Circulation Fan | 1 unit 4kw high temperature fan. Air flow capacity: 9000m³/h; Fan and burner box inner is 1.2mm thick stainless steel; Out is also 150mm thick rock wool panel to keep heat. |
6 | Heating System | 1 set of Riello FS34 natural gas(LPG,diesel) burner, 340000KCal/h Max temp:220℃, heating time: 20-25min(180-220℃) |
7 | Motor Power | 380V AC/3Ph/50Hz; or as requirement; |
8 | Electrical Control System | Baking, Indicator; Pre-set baking time; Power On/Off Control, Indicator; Emergency Stop |
9 | Working Temp. | 200℃ |
Customization of powder coating oven
For customized design upon your request , please kindly let us know
the detailed info :
1. Workpieces Max weight and Max size (length ,width and high) and
picture.
2. The material of the workpiece.
3. The heating power: Liquefied Petroleum Gas, Liquefied natural
gas, Diesel, Electric, Coal or
Biomass particles.
4. The local electricity conditions(V/PHASE/HZ)
1.Installation?
Deliver with detailed specification of installation and operation
2.Payment terms?
T/T,30% for deposit and the balance 70% before loading into
container.
3.About design?
We will design according to the information which customers offered
and send the design drawing to confirm.
