Custom 455 Steel Forging Parts AMS 5617 Flat Bar
Description
Custom 455 Steel Forging Parts AMS 5617 Flat Bar is an advanced
martensitic alloy in the area of precipitation hardening stainless
steels. Custom 455 Steel Forging Parts AMS 5617 Flat Bar combines
corrosion resistance, one-step age hardenability, ease of
fabrication.
All of Custom 455 Steel Forging Parts AMS 5617 Flat Bar conform to Military standard, nuclear power. 100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal, Steel Forging Parts, Custom 455 Steel Forging Parts
- Shape:Stainless Steel
- Round bar / Wire rod (Diameter): 5.5mm to 800mm
- Square bar / Flat bar: 3mm to 800mm
- Forging piece: stepped shafts with flanks / discs /tubes /slugs
/donuts /cubes /other different shapes based on OEM.
- Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X
L1000-12000mm
- Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 -
2000mm
Products Details
Custom 455 Steel Forging Parts AMS 5617 Flat Bar
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
C (％): ≤ 0.030
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 11.00 ~ 12.50
Ni (％): 7.50 ~ 9.50
Ti (％): 0.90 ~ 1.40
Mo (%): ≤ 0.50
Cu (%): 1.50 ~ 2.50
Nb (%): ≤ 0.50
N (%): ≤ 0.015 | Form: bar, plate, strip, sheet and forgings
Tensile strength, σb/MPa: 793 max. ( wire , cold drawn, annealed )
Heat treatment condition:
Tensile strength, σb/MPa: 1500 min.
Yield strength, σ0.2/MPa: 1413 min.
Elongation, δ(％): 10.0% min.
Reduction of area, ф (％): 40.0%
Hardness under annealed condition | HBW: 331 max. |
Applications:
Custom 455 Steel Forging Parts AMS 5617 Flat Bar is often used in
the Drill bits, Drivers, Distractors, Shafts, Surgical instruments
for orthopedic, spinal, and dental markets, etc.
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of raw materials and test the finished products in
strict accordance with the standards stipulated in the contract. In
this process, the inner and outer surfaces, the appearance of both
ends, bending, set length, outer diameter and Wall thickness will
be checked one by one. You can rest assured that all products you
receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
