Item: 2.7mm Cup Head Insulation Pins

Material: Galvanized steel

Head Size: 30mm
Head Edge: Beveled edge washer to prevent cutting of insulation material.
Pin Diameter: 2.7mm
Pin Length: 1" / 25mm

Photo

Cup head insulation pins consist of a round washer and a nail.

Washer material

Washer

size (B)

Nail

material

Nail

dia (A)

Pin

length (L)

Galvanized steel

25mm,

30mm,

38mm,

Galvanized steel,

Copper coated steel

2mm,

2.7mm,

3.0mm,

3.4mm

3/8" - 12"

Note

The washer and nail size could be customized .

Beveled edge cap

Prevents tearing of duct liner

Faster welds

Forged diamond point design creates more electrical resistance for faster welds.

Better plating

Zinc and copper plating exceeds SMACNA standards and gives a more professional appearance.

Reduced down time

Consistent point quality reduces frequency of machine adjustments.

Stronger welds

Hardened steel point assures positive electrical contact for complete sheet to pin fusion.

Applied with standard equipment

Easily applied with automatic pin welder or most standard hand held or hopper fed resistance welders.

Item: Cup Head Insulation Pins

1. This product is usually applied with a capacitor discharge stud welder.

2. The method of application is to place the insulation onto a metal surface, push the cup head insulation pins through the insulation, and weld affix (mount) the entire fabrication in one step.

5. Cup head insulation pins are widely accepted as labor saving fasteners in the thermal and acoustical insulation markets primarily for commercial type insulation applications.

Recommended for

Pin length before welding

1/2" insulation(all densities)

12.67mm

1" insulation(1-1/2"ib density)

17.63mm

1" foam

25.55mm

1" insulation(3ib densities)

23.72mm

1-1/2" insulation(all densities)

28.42mm

2" insulation(1-1/2"-2" ib density)

37.95mm

2" insulation(3ib densities)

48.77mm

3" insulation(all densities)

69.85mm

4" insulation(all densities)

95.00mm

1. 2000 pcs / 3000 pcs/ 5000 pcs per carton