10A High Current DIP Accept Customized Service Spring Loaded Pogo
Pin
The Pogo pin can better transmit the high-frequency signal of the
antenna. Compared with the antenna single piece, the Pogo pin has
smaller distributed capacitance and distributed inductance due to
the shorter current path at the same working height, which is more
conducive to block matching, especially in the high-end segment.
Based on the same working height, the Pogo PIN has a smaller
distributed capacitance.
Characteristic
1. Jumper wire can be realized between board and board, which is no
longer bound by line.
2. Small size and fine type development.
3. High durability can be inserted and removed times.
| Custom DIP Spring Loaded Contact Pogo Pin For PCB Mount Pin
Connector |
| stainless steel, Brass, Aluminum, Etc. |
| Zinc / Nickel / Copper Plating, Powder Coating, Etc. |
| Nonstandard or OEM |
| 100pcs |
| PE bag inside, carton outside or per our customers needs |
Characteristics:
1. Female pogo pin connector, male pogo pin connector,
2. Free samples with high class precision, 0.01mm precision
3. High recycling, Large Current ,Low MOQ, Low-Resistance
4. Standard & Non-Standard Pogo pin connector
5. OEM / ODM , Can be custom Designed
6. One Row, two rows, three rows
7. Surface Mount Soldering, Double Head, Flat Head
8. Waterproof
| Structure | Ball beads structure | Sloping structure | Perforated structure | Claw structure |
|---|
| Contact impedance | ≤ 10mΩ | ≤ 30mΩ | ≤ 50mΩ | ≤ 5mΩ |
| Long service time | 10000+ | 10000+ | 10000+ | 500+ |
| Recommended working current | 10A max | 10A max | 10A max | 10A max |
| Main application areas | Mainly used for charging and condition with certain requirements
for vibration and shock | Mainly used for charging or signal transmission of Consumer
electronics | Mainly used for signal transmission or grounding antenna,etc. | Mainly used high-frequency,anti-instantaneous,the situation which
high-reliability is required,such as base stations,military
industries,vehicles. |
| Remarks | The beads increase the internal contacts,the contact is more
stable,and the more needle space is required | The most commonly used structure on the market | The space is smaller,but the contact is not stable,the current is
easy to run through the spring,and it is not recommended for
charging | The needle and the needle tube have multiple contacts to increase
the contact stability |
How to place the order
* You send us drawing or sample
* We carry through project assessment
* We make the sample and send it to you
* You think the sample is good then place an order and pay us 30%
deposit
* We start to make the product
* When the goods is done, we take photoes for your check and you
then pay the balance
* We deliver the products to courier company
