SAE 17-22-A Alloy Round Bar SAE J467b-1956 R1968 BH
Description
SAE 17-22-A Alloy Round Bar is Special Purpose Alloys (Superalloys)
All of SAE 17-22-A Alloy Round Bar SAE J467b-1956(R1968) conform to Military standard, nuclear power. 100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal, Alloy Round Bar, SAE 17-22-A Alloy Round Bar
- Shape:Structural Steel
- Round bar / Wire rod (Diameter): 5.5mm to 800mm
- Square bar / Flat bar: 3mm to 800mm
- Forging piece: stepped shafts with flanks / discs /tubes /slugs
/donuts /cubes /other different shapes based on OEM.
- Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X
L1000-12000mm
- Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 -
2000mm
- Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in
coil form)
- Length: Fixed length or random length or based on the customer's
special requirement.
|
Products Details
SAE 17-22-A Alloy Round Bar SAE J467b-1956(R1968)
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
C(％): 0.45
Si(％): 0.65
Mn(％): 0.55
Cr(％): 12.5
Ni(％): —
Mo(％): 0.55
Co(％): —
W(％): —
Al(％): —
Cu(％): —
Ti(％): —
V (％):0.30 | Tensile strength σb≥/MPa: 1250
Yield strength σs≥/MPa: 1000
Elongation δ5≥(%): 15.0
Impact, AKV≥/J: -
Annealed hardness HB: 355 min. |
Applications:
SAE 17-22-A Alloy Round Bar SAE J467b-1956 (R1968) is often used in
the shafts, sickles, axes, knives, wood working drills, hammers,
etc.
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of raw materials and test the finished products in
strict accordance with the standards stipulated in the contract. In
this process, the inner and outer surfaces, the appearance of both
ends, bending, set length, outer diameter and Wall thickness will
be checked one by one. You can rest assured that all products you
receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
