250VDC Film Capacitor Metallized Polyester Film Capacitor 0.001uF
~10uF
Features
- Small volume, good self -healing: High impact strength
- Metallized polyester film, non-inductive
- Small loss at high frequency
- Small inherent temperature rise
- Flame retardant epoxy resin coating
Applications
- Widely used in high frequency, dc, ac pulse
- Electronic ballast, the switch mode power
- Suitable for all kinds of high frequency purpose
Configuration
Non-inductive, wound with metallized polyester film as the
dielectric and electrode with copper-clad steel leads and epoxy
resin coating.
copper-clad steel leads and epoxy coating
Specifications
| Work Voltage | 100V, 250V, 400V, 630V, 800V, 1000VDC |
| Voltage proof | 1.6UR (2S ) |
| Capacitance Range | 0.001~10μF |
| Capacitance Tolerance | ±5% (J) ± 10% (K) |
| Dissipation Factor | 1.0%Max at 1KHz,25℃ |
| Operating Temperature | -40℃~ +85℃ |
| Insulation Resistance | >50000MΩ(C<0.33μF)
>15000S(C>0.33μF) |
Application Occasions
Our Film Capacitors are widely used in different occasions.
Advanced Production Equipments & Strong Production Capability
Our machines are specially imported from abroad. They are including
vacuum film coating machines from LEYBOLD of Germany, the most
advanced slitting machines from VACOTEC of Korea , winding
machines, masking machines and testing machines from Taiwan, etc.
Our series of strong products of capacitors can be divided into
below types:
★ Ceramic Disc Capacitor( low and high voltage, Y1/Y2 safety )
★ Multilayer Ceramic Capacitor( radial, axial and SMD )
★ Film Capacitor( Mylar, MKT, MKP, X2, CBB60, CBB61, CBB65,
CL21-Box, CBB-BOX, CL20, CBB20, CBB81, etc. )
★ Aluminum Electrolytic Capacitor(SMD, Radial , Axial, Snap-in ,
Screw Terminal, etc. )
★ Tantalum Capacitor(SMD, Radial , Axial )
★ Super Capacitor( Coin Type, Cylindrical Type, Module Type)
★ Mica Capacitor
★ Trimmer Capacitor
And series of resistors which we develop new production lines are
as below:
★ SMD Resistors
★DIP TYPE Resistors( KNP, CF, MF, MOF, ect,)
★ Cement Resistors
★ Leadless Resistors( MLEF)
★Power Resistor
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality.
Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production
average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than
that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a
quotation?
Basically for capacitor, it requires to know detailed capacitance
and voltage. If you have more information, such as type, product
photo for reference, you could kindly provide too.
