Mining Clay Rotary Kiln For Laboratory Industry
Main uses and characteristics:
It is suitable for roasting and sintering test of materials in
metallurgy, geology, mining, chemical industry, building materials
and scientific research institutions. The machine can continuously
feed and discharge materials, and the material handling capacity is
large. The two ends of the furnace tube are sealed, and the
necessary gas for protection, oxidation and reduction can be
introduced during operation. Compared with the traditional muffle
furnace and tube furnace, the advantage of this machine is that the
furnace tube can be rotated, and the sample is constantly turned
during the processing. Therefore, the processing quality is good,
the efficiency is high, and the experimental data obtained are
closer to the production state.
Parameter
| Main technical parameters of laboratory rotary kiln |
| Parameter item | Unit | Laboratory rotary kiln |
| Rated maximum furnace temperature | ℃ | 130 (Continuously adjustable, automatic control) |
| Furnace tube speed | Rev/min | 0-3.3 (Stepless speed regulation) |
| Furnace tube inclination | ℃ | 0-10 (Adjustable) |
| Furnace tube size | | 92/100×1200 (Inner diameter/outer diameter*length) |
| Rated furnace power | kw | 24 |
| Machine weight | kg | 775 |
| Rated motor power | kw | 0.6 |
| Controller weight | kg | 160 |
FAQ to save your precious time!
Q1: What's the standard length of your profiles and tube?
A: The standard length of profiles and tube are 5800mm to suit for
small container, and we also can cut to specific length, however a
surcharge of machining and material scrap cost will be charged
accordingly based on each individual invoice.
Q2: What's your MOQ?
A: we have no MOQ for our new customers, however a surcharge of
USD80 will apply for all orders less that USD 1000 for custom
handing cost purpose.
Q3: what is your payment terms?
A: The payment terms we accept is T/T or irrevocable L/C at sight,
T/T preferred.
Q4: What's the lead time for small order and mass production?
A: 1-3 working days for small order, and 3-10 working days for mass
production of material, and the final lead time will be subject to
each individual invoice.
Q5: What certification do you have?
A: We have ISO 9001:2008 certificate.
