USB Optical Power Meter Module Rapid Sampling Dynamic Range
+5~-80dBm
UC8721 USB Optical Power Meter Module
Product introduction
UC8721 is a USB interface optical power meter module. It’s sampling
period achieves microsecond, and can collects and processes data at
a high rate of speed.
The UC8721 optical power meter module provides a USB communication
port connected with the PC. The operator uses its Demo program to
control the UC8721, views the measurement values and sets the
parameters. The UC8721 optical power mete module offers superior
performance in testing DWDM Components, AWG&PLC components,
optical amplifiers, and performing other general-purpose fiber
optical test and measurement applications. Compared with other UC
Instruments power meter modules, UC8721 features high speed
sampling and compact dimension and It is especially suitable for
the optical power meter sampling system which is assembled into
various forms and multiple channels.
Software should be used
The UC8721 optical power meter module can communicate with a PC
through its built-in USB communication cable. The UC8721 optical
power meter module can use the application software provided by
Guangzhou Youxi to set module parameters and perform all
application operations.
Describe with a door interface
USB to 1B4 core shielded cable
The communication port is connected to the USB to 1B4 core
shielding cable, which can be directly connected to the PC to
establish communication.
Synchronous input port
The synchronous signal input port, using SMA connector, receives
the pulse trigger signal from the outside, the rising edge is
effective.
Optical input interface
Laser signal input port.When an optical fiber jumper is connected
to an optical power meter module, a connection adapter is required
in the middle.The connection adapter must match the type of the
power meter connector and the fiber connector.
The following figure lists two typical connection adapters for
connecting optical fibers to the UC8721 optical power meter for
reference.
