Pouch Cell Vacuum First Sealing Machine
Brief Introduction
This product is used for the vacuum and hot pressing pre-sealing
process of pouch cells subsequent to electrolyte injection and
standing. This machine automatically completes the vacuum heat
sealing of the aluminum laminated case by precisely controlling the
main vacuum pumping box and pneumatic heat seal components.
Features
● The sealing blades are made of copper material, boasts excellent
thermal conductivity, thereby
boosting working efficiency and reducing energy consumption.
● The pressure of the upper and lower sealing blades can be
adjusted by pressure regulating valve to meet different process
requirements.
● The upper and lower sealing blades are driven by gas cylinders
and guided by two linear guide bushings, which are flexible in up
and down movement and guided accurately to ensure the parallelism
of the sealed edges.
● Through the window can observe the changes in the chamber during
running process.
● The cover is driven by gas cylinder and guided by rotating guide
bushings, with flexible up and down movement and accurate guiding
to ensure the excellent sealing effects.
● It can be applied to different sizes of batteries and easy to
adjust.
● Split design of electric box and working box makes the machine
can be placed in the glovebox or on the product line.
● Exquisite appearance, small size and light weight.
● PLC touch screen control, easy to operate.
Technical Details
| Model | STC-BYF-200 |
| Voltage | AC220V±10%, 50Hz |
| Power | Adopting 300W heat tube, the power consumption when heating is about 600W |
| Sealing blade length | Max 200mm, customized size is available |
| Sealing blade width | 5±0.4mm, customized size is available |
| Applicable battery size | Max L190 * W160mm (includes the air bag size) |
| Sealing thickness range | 60~300μm |
| Sealing stamp thickness accuracy | Any two points of the sealing thickness difference <15μm |
| Sealing blade temperature | RT~250℃ adjustable |
| Temperature control accuracy | ±2°C |
| Heat sealing pressure | 0～5Kg/cm2 adjustable |
| Heat sealing time | 0-99s adjustable |
| Chamber material | Aluminum alloy |
| Vacuum degree | ≤ -95Kpa adjustable |
| Gas consumption | About 0.2L compressed gas per sealing |
| Air compress working speed | ≥180 times/h |
| Compressed air source | 0.4～0.5MPa; If this device is to be used in a glovebox, air source
should be used in accordance with the working air of the glovebox. |
| Dimension | Electric box: L420 * W325 * L225mm Working part: L470 * W485 * H435mm |
| Weight | 50kg |
Warranty
1 year warranty with lifetime support. Man-made damage is not
covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 year experience for manufacturing battery lab
research equipment. We own a professional R&D department.
2. Do you accept customized product?
A: Yes. Most of our products can be customized to meet different
requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch,
which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site
installation service.
