The factory to sell SANY 365 22meter long reach excavator boom and
arm
Material: Sheet material is Q355B, the hydraulic steel pipes are
Cold drawn seamless steel pipe, the pin material is 40Cr, the
high-pressure hose is a joint venture pipe with 4 layers of wire
coil, the butter pipe is single layer hose, and the bushing into
the large arm base is graphite alloy copper sleeve.Configuration:1pcs boom,1pcs middle arm,1pcs arm, 8pcs pins, 12
stop valves, 1pcs bucket cylinder(20t level), all high pressure
hoses, 1 kit Linkage.
Product advantages: The size of the large and medium-sized arms
designed by our company is reasonable. After installing the
breaker, the dismantling arm can rotate normally. The large and
medium-sized arms can achieve a 180-degree opening angle, and the
overall dismantling height will be higher. The production process
is ahead of the industry average, and the product quality is better
than the same grade.
Suitable working conditions for building demolition arm: urban
village reconstruction, building demolition, old factory building
reconstruction, high-rise demolition project, etc.
1. Payment requirements: 30% deposit shall be paid in advance when placing an order, and the
remaining balance shall be paid before leaving the factory.
2. Delivery time: 7 days for 1-6 sets, 10 days for 7-12 sets, and one month for 12-40
sets.
3. Minimum order quantity: 1 set.
4. Product quotation: The quotation shall be made according to the model and length, or
the requirements of working conditions.
5. Product quality inspection: The factory has an independent quality department. Each product is
tested and can leave the factory only after it is qualified.
6. Whether it can be OEM: It can be OEM as required, but it can be OEM only with the
authorization of the brand party.
7. Process flow: Design - typesetting - blanking and cutting - parts machining -
beveling of semi-finished products - assembly - Welding - pipe
layout - welded pipe - grinding and sandblasting - Painting -
assembly - quality inspection - packaging.
8. Design sample drawing: Providing working condition design sample drawing free of charge.
9. Color requirements: The color can be customized according to user needs, generally
according to the color of the host.
10. Process requirements: Gas welding is adopted for the main body, plasma cutting is adopted
for blanking cutting, argon arc welding is adopted for pipeline
welding, and finish machining is carried out after quenching and
tempering.
| category | model | Part Length | Total length(m) | weight(kg) | Maximum removal height(m) |
| Boom | 40T | 11.5 | 22 | 4000 | 22M |
| Middle arm | | 2.4 | | 1200 | |
| Arm | | 8.1 | | 2800 | |
