Custom Oem Construction Machinery Digging Bucket 1 cbm Excavator
Buckets for CAT320 ZX200 DX200 SY205C
click here to read our catalog:Zhonghe Machinery Catalog-Contact Sales Manager Aria Directly
Click here to check our facebook: Grapple Excavator
Introduction of ZH backhoe rock bucket
ZHONGHE rock bucket increases your productivity with a 10-20%
higher payload without increasing suspended load. This is equal to
a 15-30% reduction of steel in the bucket.
There are multiple advantages associated with this feature. Such as
reduced resistance in operation, optimal material flow and
distribution of stresses.
The curved cutting edge moves the weld away from the area of
highest stress, increasing structural integrity while accommodating
natural flex to alleviate stress points. This also allows for a
thinner cutting edge, so you cut into material easier.
The opening angle can be customized as your requirement.
Other Bucket Recommended
1. Standard bucket
Q355B material, standard plate thickness, and China high-quality
bucket tooth base. It is mainly applicable to light operation
occasions such as excavation of general clay and loading of sand,
soil and gravel.
2. Rock bucket:
Q355B material, NM400 optional. On the basis of the standard
bucket, reinforcing plates are added at the bottom, and the tooth
plate and side plate are thickened. It is mainly applicable to
heavy and light industrial occasions such as excavation of hard
soil and loading of soil, gravel and gravel mixed with soft sand.
3. Heavy duty rock bucket:
Q355B+Hardox500. On the basis of the reinforced bucket, the bottom
plate and side plates are thickened. It is mainly applicable to the
excavation of hard rocks, secondary hard rocks and wind fossils
mixed in the soil; Loading of hard rock and ore after blasting.
4. Skeleton excavator bucket
5. Tilt bucket for mini excavator
6. Clamshell excavator bucket
7. Grading ditching bucket
8. Excavator Ripper
9. Excavator Log Grapple
Advangtages of ZHONGHE MACHINERY
GOOD SERVICE:
1. Online support within 24 hours.
2. Appointment video technical support.
(Our engineers have focused on excavator boom and attachment over
10 years)
3. Long excavator boom shall be two/three jointed pcs to make it
fittable into container to save shipping cost.
WARRANTY
1 year for long reach boom, 180 days for cylinder and linkage, 90
days for bucket.
Recommended Excavator Attachments
1. Long reach excavator boom
2. Excavator telescopic boom
3. Demolition boom
4. Excavator rock bucket
5. Excavator tilting bucket
6. Hydraulic grabs for excavators
7. Other excavator attachments
Company profile
CERTIFICATIONS
TOP PICKS
Any interest, Please feel free to contact Aria directly!
click here to chat with Aria: Whatsapp/Wechat/tel:+86 13822325403
