LIYI Simulate Battery Squeeze And Puncture Equipment Battery
Extrusion Needling Test Machine
Product overview:
The battery extruding and needling machine is applicable to
simulate the situation of battery being squeezed and punctured when
various batteries are used, transported, stored or treated with
household wastes.
The extrusion direction of extrusion test shall comply with the
following rules: one battery is extruded only once, and the battery
is qualified if it does not explode or ignite.
1. For cylindrical batteries, the longitudinal axis of the extruded
battery shall be parallel to the two flat plates of the extrusion
device;
2. For square and soft packed batteries, only the wide surface of
the battery shall be squeezed;
3. For coin type or button type batteries, the upper and lower
planes of the battery shall be pressed parallel to the flat plate.
The needling test shall be carried out under the environment of 20
℃± 5 ℃. The battery shall be placed on the clamp and the diameter
of φ 3- φ An 8mm non-corrosive steel needle is inserted into the
center of the battery surface at the speed of 10mm / s-40mm / s,
and the test results are observed at any time. The battery is
qualified if it does not explode or ignite. The battery extrusion
tester complies with gb31241-2014 and other standards.
According to standard:
GB 31241-2014,GB/T 8897.4-2008,YD/T 2344.1-2011,GB/T 21966-2008,MT/T 1051-2007,YD 1268-2003,GB/T 19521.11-2005,YDB 032-2009,UL 1642,UL 2054,IEC 62281,IEC 60086
Specifications:
| Specifications | Parameter |
| Environmental requirements for equipment use | Temperature below 45 ℃, humidity below 80% |
| Power Supply | AC220V,50/60Hz |
| source of water | nothing |
| vacuum | nothing |
| compressed air | nothing |
| Ground requirements and bearing requirements | Concrete ground, ≥ 600kg, |
| Network requirements | nothing |
| Construction requirements for smoke, dust, waste gas and wastewater
treatment plant | Exhaust gas discharge port diameter: 100mm |
| Accepted Delivery Terms: | FOB, CFR, CIF, EXW, DDP |
| Accepted Payment Currency: | USD, EUR, HKD, CNY |
| Accepted Payment Type: | T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
| Nearest Port: | Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
FAQ
Q: Are your company a trading one or a factory ?
A: We have our own factory and we have also register a trading
company for more options (in order to make the business more
simple) for more than 18 years focusing on test instruments field
and 15 years exporting experience. As one of the toppest supplier
in Dongguan, OEM/ODM is warmly welcome from all of you as long as
you confirm us with your requirement.
Q: How to choose the most suitable products?
A: Our professional team will give you the best suggestion as long
as you tell us what kind of test you need to do and the required
specification.
Q: What's the delivery term?
A: At most of time, we have stock in the factory. If there is no
stock, normally, the delivery time is 15-20 working days after
deposit receipt. If you are in urgent need, we can consider making
special arrangement for you.
Q: Do you accept customization service?
A: Yes, of course, we can not only offer standard machines, but
also customized machines according to your request. Don't hesitate
to tell us your requirement, we will do our best to meet your
needs.
Q: Can we visit your factory before order?
A: Yes, we warmly welcome and sincerely invite you and your team to
visit our factory, we will help to arrange hotel and pick up you
from airport.
Q: How about your warranty?
A: Generally, our warranty is one year. Within the warranty period,
we can offer technique support and part parts change, if it's
necessary, our engineers may go to your place for better service.
Q: What is the order process?
A: Get Inquiry - Send the Quotation - Confirm the requirements -
Order confirming - Payment - production - testing and debugging-
packing - Confirm with customer about the necessary documents-
Arrangement the Delivery - Send the product out - Customer
Receiving - After Service.
Q: How to install and use the product?
A:About the machine you grt from us, we will send you an operation
video to teach you how to install and use the product with English
speaking. However, if you need us to teach you face to face, please
let us know in advance
