Heating Up -40°C ~ +100°C Walk In Environmental Chamber Display LCD
Equipment Overview:
This walk-in test chamber simulates the temperature and humidity
changeable environment for the products or materials. It is widely
used in the adaptability test of electrical, electronics,
instrument and meter and other product parts under high and low
temperature and humid environment during storage, transportation
and usage, to determine the temperature adaptability of the above
products or materials to high and low temperature and humid
environment, especially for product electrification changes in
performance and mechanical properties.
Walk-in laboratory performance and characteristics:
1, with a very wide temperature and humidity control range, can
meet the needs of users. The unique balanced temperature and
humidity control method can obtain a safe and accurate temperature
and humidity environment. With stable and balanced heating and
humidification performance, high precision, high stability of
temperature and humidity control.
2, equipped with high precision intelligent temperature regulator,
temperature and humidity by LED digital display mode. Temperature
and humidity recorder is optional.
3, automatic selection of refrigeration circuit, automatic control
device with the temperature of the set value of automatic selection
of refrigeration circuit performance, to achieve high temperature
state directly start the refrigerator, direct cooling.
4. The inner door is equipped with a large observation window,
which can facilitate the observation of the test state of the
sample.
5, equipped with advanced safety, protection device - leakage
circuit breaker, overtemperature protector, lack of phase
protector, water protector.
High and low temperature test chamber, constant temperature and
humidity laboratory, high and low temperature humidity and heat
laboratory, high and low temperature alternating humidity and heat
laboratory, salt spray corrosion laboratory, the above laboratory
can be customized according to customer requirements.
Detailed Parameters:
| System | Balanced Temperature & Humidity Control System |
| Temp. range | -70°C~150°C |
| Humid. range | 20 ~ 98 percent R.H. |
| Temp. & Humid. accuracy | ± 0.3°C; ± 2 percent R.H |
| Temp. & Humid. regularity | ± 1°C; ± 3 percent RH |
| Resolution | 0.1°C, 1 percent, P.I.D control |
| Heating up | -40°C ~ +100°C within 45 min |
| Heating down | 20°C~ -20°Cwithin 40min |
| Interior dimension(W×D×H) | 60×80×85cm |
| Exterior dimension(W×D×H) | 120×135×175cm |
| Interior material | Stainless steel plate(SUS304) |
| Exterior material | Stainless steel plate(SUS304) |
| Insulation | Rigid foam |
| Refrigeration system | Air cooled, Hermetic compressor, single stage refrigeration system. |
| Display | LCD |
| Safety devices | No fuse breaker refrigerator over load relay, Refrigeration High
pressure Switch, Over Temp, Protector, Protection relay, Protection
fuse, Water Lever protector, Overheat protector, Alarm |
| Accessories | Viewing window, Shelves (freely adjustable 2 pcs.), Cable
port(Ø50mm)Chamber lamp. |
| Weight | Approx. 400kg |
| Power | AC220V±10 percent 50/60Hz
|
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
