Raycus IPG Pulse Laser Source 500W 1000W Handheld Fiber Laser
Cleaning Machine
Basic introduction
Laser cleaning equipment is a new generation of high-tech products
for surface cleaning. Easy to install, operate and automate. Simple
operation, turn on the power and turn on the equipment, you can
clean without chemical reagents, medium, and water. It has the
advantages of manually adjusting the focus, cleaning with curved
surfaces, and cleaning the surface with high cleanliness. Stains,
dirt, rust, coatings, plating, paint, etc.
Features
1. Non-contact cleaning, does not damage the parts matrix.
2. Precise cleaning, which can achieve selective cleaning of
precise location and precise size.
3. No chemical cleaning solution, no consumables, safe and
environmentally friendly.
4. The operation is simple, just power on, and it can be hand-held
or cooperated with a manipulator to realize automatic cleaning.
5. The cleaning efficiency is very high, saving time.
6. The laser cleaning system is stable and requires almost no
maintenance.
Application industry
It is mainly used for laser cleaning and surface laser pretreatment
of metal surfaces such as precision molds, metal products, ships,
automobiles, medical equipment, sheet metal/spraying, etc.
| Laser Power | 500W | 1000W |
| Laser Source | Raycus/IPG | Raycus/IPG |
| Central Wavelength | 1064±5 | 1064±5 |
| Power Regulation Range | 10-100 | 10-100 |
| Outpit Power Instability | ≤5 | ≤5 |
| Pulse Length | 60-160 | 60-160 |
| Maximum Monopulse Energy | 30 | 50 |
| Fiber Length | 10m | 15m |
| Laser Protection Class | 4 | 4 |
| Cooling Type | Water Cooling | Water Cooling |
| Dimensions | 830*1270*1520mm | 830*1270*1520mm |
| Cleaning Performance Parameters |
| Based material | Surface | Effective focal length | Standard cleaning efficiency | High cleaning efficiency | Result |
| Cast iron | Heavy rust 0.08mm | >35mm | 2000mm/m | 3000mm/m | Clean, no harm for base material |
| Mild steel | Middle rust 0.5mm | >45mm | 1800mm/m | 2400mm/m | Clean, no harm for base material |
| Stainless steel | Oil, light rust | >50mm | 2000mm/m | 3000mm/m | Clean, no harm for base material |
| Mould gear | Middle oil with scrap iron | >45mm | 2000mm/m | 2300mm/m | Clean, no harm for base material |
| Aluminum | oxide | >35mm | 2000mm/m | 2300mm/m | Clean, no harm for base material |
DP Laser cleaning machine has advanced technology, with humanized
design, small size, flexible operation, low energy consumption,
environmental protection and other characteristics, with certain
practicability and operability. Customers can preset the cleaning
mode through the software, and can directly switch the mode to
operate without adjusting the parameters, and start cleaning
without chemical reagents, media, dust and water. Through automatic
focusing, cleaning the surface of the object, and removing resin,
stains, corrosion, coatings, paints, etc. on the surface of the
object, the cleanliness is high.
