Biosound Mylab 40 Measurement Ultrasound Machine Repair Replace Mainboard

Biosound Mylab 40 Measurement Cannot Be Used Ultrasound Machine Repair Replace Mainboard

1. Repair time: 2-4 days
2. Warranty: 60 days
3. Fault phenomenon:Measurement Cannot Be Used

Various GE//Siemens/Toshiba/Hitachi/ Biosound ultrasonic boards are within our repair/ mintenance range.

Other ultrasound parts related that we can offer:

Knowledge point

Common sence of the caolor ultrasound machine maintenance

1.Operating procedure for cleaning and maintenance
1) Turn on the power, check whether the startup and operation functions of the equipment are normal and whether there is any error message.
2) Record the name, model, hardware and software version of the device, and configuration of the probe.
3) Ask the user about the use of the equipment.
4) To turn it off.

2.Remove the peripheral parts of the equipment and disconnect all cables from the equipment
1) Pull out the power cord of b-mode ultrasound from the plug and cut off the power supply of the equipment.
2) Carefully remove the probe from the connector and place it in an appropriate place for storage.Preventing accidents such as dropping, collision and cable pulling
3) If b-ultrasound is equipped with external devices such as printer and video recorder, these devices should be disassembled and separated from the host.
4) Disconnect the signal line and control line,which connected with b-ultrasonic.Note the cable interface location for future recovery.

3.Remove the device
1) In order to achieve an effective dust removal effect, the equipment must be dismantled.
2) The location of the cable connector is very important. Although most equipment has a device to prevent wrong insertion, it is still important to remember that the connector being put correct.
3) Separate the shell, components, etc. of the equipment with appropriate tools and in a correct manner.These jobs do not require much effort under the right operating procedures.But improper disassembling methods and violent disassembling will lead to equipment damage.
4) The screws and other parts which being departed before must be carefully stored, in order being lost.

Precautions for Maintenance

Before delivery, we'd like to confirm the below details of your defective ultrasonic board.

Have your board ever repaired? ( Better to be never repaired)

Is the board original in complete condition?

What's the detailed faults? ( Send me fault description, fault image or video)

Your answers will help our repair engineers team to prejudge whether it's repairable.

Rongtao Medical was established in 2013, we have been focusing on providing after-sales service for medical equipment for the last ten years, especially in ultrasound. We have been continuously improving our technical capabilities, breaking through technical problems, innovating service models to extend the lifespan of ultrasound equipment, and reduce the cost of medical equipment.

Rongtao Medical are specialized in providing high-quality, efficient and affordable repair solutions for ultrasound equipment, like GE, Philips, Toshiba, Siemens, Aloka Mindray, Samsung etc. All repaired ultrasound boards and probes are individually tested on real equipment, and all boards are sealed in anti-static packaging before delivery to you.

Rongtao Medical offers free consultation of ultrasound troubleshooting identification and technical support to our customers. We also provide lifelong service for all ultrasound parts and probes that we have been serviced.

Our Vision -- To be the top preferred ultrasound service company worldwide!