Custom Automatic Loading And Unloading System 220V 380V For Producing Floor Tiles

Loading And Unloading System Is Suitable For Producing Floor Tiles And Used For The Single Layer Chamber Drying Mode

Loading and unloading system

The system is used for the single layer chamber drying mode. Which is used for loading green bricks on the pallet or unloading dried bricks from pallet.

The system is suitable for producing floor tiles, porous bricks and high hole rate hollow bricks with annual output of 40 million bricks below, and suitable for all kinds of raw materials.

According to the actual production requirements of customers, combined with the two time setting and firing process to provide customized, personalized automatic frame equipment, to achieve the brick factory with unmanned operation, full automation and intelligent. Which is also can meet the product diversification and ensure product quality.

Key Equipment

Waste Brick Treatment Bench

The purpose of the device is to automatically send the bad bricks produced by the broken cutting wire in the work of the cutting machine to the waste brick belt, and the qualified bricks to the departing belt conveyor.

Departing Belt Conveyor

Departing belt conveyor is an equipment for departing qualified bricks automatically due to the belt speed difference. Its purpose is to depart the bricks sent by the cutting machine and send the bricks to the programming bench.

Programming Bench

The automatic programming bench is the key equipment in the brick production line. It is located between the cutting equipment and the stacking equipment in the technological position. The automatic programming bench has many functions such as conveying, turning over, grouping and departing.

Pallet Conveyor

Transport the green brick pallet to loading part; Transport the dry brick pallet from the loading shelf to the programming table

Loading Shelf, Unloading Shelf

The loading shelf stores a whole son-cart's pallets with green bricks and wait for the mother-cart transported that to the drying room; The unloading shelf stores a whole son-cart's pallets with dried bricks.

Forklift

Transport the pallet with green bricks into the drying room; Transport the pallet with dried bricks from the drying room to the unloading shelf.

BBT focuses on the core business development by concentrating on the professionalization strategy. We devote ourselves to integrating technical solutions of production line process design, thermal design, equipment R&D, trade,mechanical and electrical equipment installation, international engineering, project consultancy, technical service for producing sintered wall materials of fired perforated brick, paving block, facing brick, hollow block, insulating block, wall board.

BBT takes the market demand as guidance, creates the value for the customer as objective and sincerely provides:

1. Process design of directing setting, two times setting and firing technology(BBT masters core technology);

2. Wall boards production process technology;

3. Prefabricated walls production process technology;

4. Key equipment in raw materials treatment process: wet pan mill, high speed fine-pulverized roller;

5. Key equipment in molding process: extruding type mixer and filter mixer;

6. Equipment R&D and manufacturing of fully automatic cutting, marshalling, brick stacking, loading and unloading;

7. Equipment R&D and manufacturing of thermal running, thermal monitor and control system;

8. All types of fuel combustion and control systems;

9. Management services of brick & tile production technology.

With the love of brick, BBT will continue to take unremitting efforts to provide our clients with high standard brick making production line through continuous innovation and strict industrial chain development and management.