SN74LVTH273-EP

This octal D-type flip-flop is designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The SN74LVTH273 is a positive-edge-triggered flip-flop with a direct-clear (CLR) input. Information at the data (D) inputs meeting the setup-time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a particular voltage level and is not related directly to the transition time of the positive-going pulse. When the clock (CLK) input is at either the high or low level, the D-input signal has no effect at the output.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

TOPFAST CHIP is a distributor of PLC industrial control equipment. We currently sell PLC products including: SIMATIC; INOVANCE; PEPPERL+FUCHS; Schneider; Mitsubishi; Allen Bradley; ABB; Omron. We are confident that we offer a wide range of products that we hope will meet your requirements. We look forward to assisting you with all your requirements and providing a prompt and responsive service.