Product name:
Factory Direct Dielectric Constant Simple Hand Application EPDM
Rejecket Sleeve
Description:
Zk cold shrink tube is an open-ended cold shrink rubber sleeve,
which is pre-expanded by the factory and assembled onto a removable
core. The core is removed when the tube is positioned for
installation over an online connection or termination lug. It
provides a tight water proofing property for termination and
joints.
We have more than ten years experience of cold shrink tube line
with professional technical knowleage and good performance.
Features:
1:Simple hand application
2:Excellent weathering properties.
3:Excellent abrasion resistance EPDM cold shrink tube
Our advantages:
1.Quotation and send detail specs in 12 hours.
2. Professional team work for your success.
3.Custom design and cold shrink kitting available
Introduction:
EPDM cold shrink tube: applied in electrical power industry, telecommunication industry or other tool product handle, eg.
bicycle handle etc. With it’s good performance: water-proof, Acid
and alkali resistance, seal, protection sleeve and low voltage seal
insulation under 1kv.
| Material technical parameters: |
| No | Items | Test method | Unit | Test standard | Remarks |
| 1 | Hardness (Shore A) | GB/T 531.1-2009 | Shore A | 43±5 | |
| 2 | Tensile strength | GB/T 528-2009 | Mpa | 8±3 | |
| 3 | Break elongation | GB/T 528-2009 | % | 800±200 | |
| 4 | Tear strength | GB/T 529-2008 | kN/mm | 38±5 | |
| 5 | Volume resistivity | GB/T 2439-2001 | Ω•cm | ≥1013 | |
| 6 | dielectric strength | GB/T 1695-2005 | MV/m | ≥18 | |
| 7 | dielectric Constant(50Hz) | GB/T 1693-2007 | / | ≤8 |
|
