Rubber Industrial Air Spring Continental FS 310-12 Contitech Single Convoluted Air Bag

Rubber Industrial Air Spring Continental FS 310-12 Contitech Single Convoluted Air Bag

Product Description

Manufacturer:Contitech

OE/OEM Number:FS 310-12

FS310-12

FS 310-12 VP

FS 310-12 VP ECO

FS 310-12 ECO

FS 310-12 S VP

Technical Data of Single Rubber Air Spring

Min.pressure-------0 bar

Return force to min.height-----------≤120N

Minimum Height------------55mm

Maximum Stroke-----------120mm

Maximum Diameter-----------320mm

Installation Space Needed------------335mm

Bead Diameter-------------------172mm

Inner Sealing and Mounting Surface--------131mm

Height of Bead---------------11mm

Maximum Loading Capacity(7bar / 115mm)--------------26.8kN

Maximum lifting Pressure--------------8 bar

Remarks

FS 310 -12 Replacement for Phoenix 1 B20

FS 310-12 ECO Replacement for Phoenix 1B20-4

FS 310-12 S VP,Bellow Style Industrial Air Spring,Single Convoluted,Flexible Ring,Bellow Only

Air Spring Application

• Scissor lift
• Hopper vibration and damping
• Mechanical handling stop
• Quick lock device
• Reel tensioning
• Machine isolation
• Direct force
• Impact absorbtion
• Roller tensioning
• Platform lift
• Short stroke mechanical linkage
• Hot foil stamping press

How is the airbag constructed?
Flexible bellows are made of fabric reinforced rubber and typically have one, two or three turns, depending on the desired stroke. The bladder is held between two chrome steel end caps, each with chrome steel studs welded; this makes the bellows easy to install, especially since they have a higher tolerance for misalignment than other linear actuators. However, the entire surface of the metal end cap must be used to withstand the force, and lateral rails should be used.

Air spring is also called air bag, bellow air spring, air bellow, etc. It is a precision-engineered rubber fiber bladder that does not provide force or support load itself, but achieves force transmission and elasticity by filling it with compressed air. The air spring has nonlinear characteristics, and its stiffness changes with the load, so its natural vibration frequency remains almost unchanged under any load, so that the spring device has almost constant characteristics; its high dynamic absorption and sound insulation performance is good; it Bearing axial load and radial load at the same time, through the adjustment of internal pressure, different bearing capacity can also be obtained. Therefore, it can adapt to a variety of load needs. Within the effective stroke, the air spring can adjust the stiffness, height, cavity volume and bearing capacity of the air spring by increasing or decreasing the inflation pressure. At the same time, its stiffness, height, cavity volume, and bearing capacity will undergo stable and periodic flexible changes with the increase or decrease of the load, thereby realizing the flexible transmission of bearing capacity, the effective adjustment of the stroke, and the adjustment of vibration amplitude and vibration load. Efficient control.

Advantages of air springs

Product Image

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.