201 stainless steel coil 1.2*1219mm cold rolled stainless steel
coil price Surface 2B BA 8K processing
Scope of application:
In the machining process, after the surface temperature cools, the
machined surface will harden. The hardened surface is hard, which
is easy to cause groove wear, that is, the V-notch on the cutting
depth line of the cutting edge. Due to the high temperature and
high pressure generated in the cutting process, the friction
resistance between the chip bottom layer and the rake face is very
high, and it is easy to "cold weld" the part material on the rake
face of the tool, resulting in chip accumulation tumors. After the
chip accumulation tumor is broken, it will be taken away by the
chip, scratch the tool surface, and make the coating and matrix
material fall off the blade, thus accelerating the loss of the
tool. Hardening acts not only on the machined surface, but also on
chips. Processing austenite will produce continuous high-strength
long chips, which are not easy to break. Long chips will affect the
product surface quality and processing safety. Some grades of
austenitic stainless steel will add sulfur (s), which can improve
the cutting performance.
Overview:
| Material | 201/202/302/303/304/316/410/420/432 |
| Size | 4'x8' |
| Quality | Excellent |
| Technique | Cold Rolled |
| Pvc | Poli Film |
Steel Grade | 301, 304N, 310S, 410, 316Ti, 316L, 316, 321, 410S, 410L, 443, 347,
430, 309S, 304, 409L, 304L, 904L |
FAQ:
Q1 . Can I have a sample order for stainless steel strips products
?
A : Yes , we welcome sample order to test and check quality . Mixed
samples are acceptable .
Q2 . What about the lead time ?
A : Sample needs 3-5 days
Q3 . Do you have any MOQ limit for stainless steel strips products
order ?
A : Low MOQ , 1pcs for sample checking is available
Q4 . How do you ship the goods and how long does it take to arrive
?
A : We usually ship by DHL , UPS , Fedex or TNT . It usually takes
3-5 days to arrive . Airline and seashipping also optional For mass
products , ship freight is prefered
Q5 . Is it OK to print my logo on products ?
A : Yes , OEM and ODM are available for us
Q6 : How to ensure the quality ?
A Mill Test Certificate is supplied with shipment . If needed , a
Third Party Inspection is acceptable
