904L Stainless steel strip precision stainless steel strip
stainless steel strip roll ss strip coil 2b stainless steel
Scope of application:
904L stainless steel strip. Surface: 2B smooth surface, No.1
industrial surface, BA (6K) mirror, 8K mirror, wiredrawing surface,
frosted surface soft hardness (soft material, hard material): deep
drawing soft material; Hard material 1/4h, 1/2h, 3/4h, h, eh, SH;
HV 30 - 650 degrees.
904L stainless steel is a super austenitic stainless steel material
The brand 00cr20ni25mo4.5cu, uns:n08904, en:1.4539, is a high
alloyed austenitic stainless steel with very low carbon content. It
has good corrosion resistance in dilute acid and is designed for
environments with harsh corrosion conditions. It has high chromium
content and sufficient nickel content. The addition of copper makes
it have strong acid resistance, especially high resistance to
chloride interstitial corrosion and stress corrosion cracking. It
is very unlikely to have corrosion spots and cracks. Its pitting
resistance is slightly better than that of other steel grades, and
it has good machinability and weldability. Non magnetic in solid
solution state
Overview:
| Material Grade | 321 |
| Type | Austenitic stainless steel |
| Category | CRC and HRC |
| Thickness | cold rolled coil <3.0MM, hot rolled coil>3.0MM |
| Main chemical composition | C, Si, Mn, Cr, P, S |
| Surface | 2B,2D,NO.4, NO8, BA,HL |
Standards | AISI ASTM JIS SUS and GB |
FAQ:
Q1 . Can I have a sample order for stainless steel strips products
?
A : Yes , we welcome sample order to test and check quality . Mixed
samples are acceptable .
Q2 . What about the lead time ?
A : Sample needs 3-5 days
Q3 . Do you have any MOQ limit for stainless steel strips products
order ?
A : Low MOQ , 1pcs for sample checking is available
Q4 . How do you ship the goods and how long does it take to arrive
?
A : We usually ship by DHL , UPS , Fedex or TNT . It usually takes
3-5 days to arrive . Airline and seashipping also optional For mass
products , ship freight is prefered
Q5 . Is it OK to print my logo on products ?
A : Yes , OEM and ODM are available for us
Q6 : How to ensure the quality ?
A Mill Test Certificate is supplied with shipment . If needed , a
Third Party Inspection is acceptable
