Industrial PaxScan® 2520DX-I
Flat Panel Detector
PaxScan 2520DX-I imagers provide industry leading image quality for
industrial and security applications.Varex Imaging’s amorphous
silicon-based detectors are the benchmark for radiography in
industrial, medical and dental applications.
Amorphous silicon brings key advantages unmatched by other
technologies, including:
- radiation hardness > 1MRad
- widest input energy range
- immunity from single photon events in the substrate
- excellent low dose performance
Varex Imaging’s extensive industrial product line allows the OEM to
easily integrate multiple panel sizes. The Virtual CP software
interface is common across all the panels and the entire product
line is off ered with Gigabit Ethernet.
Technical Specififi cations
Receptor Type . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Amorphous Silicon
Conversion Screen . . . . . . . . . . . . . . . . Direct Deposit
CsI, DRZ Plus
Pixel Area Total . . . . . . . . . . . . . . 19.5 x 24.4 cm (7.68 x
9.6 in.)
Pixel Matrix Total . . . . . . . . . . . . . . . . . . . . . . . .
1,536 x 1,920 (1 x 1)
768 x 960 (2 x 2)
Pixel Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 127 m2
Limiting Resolution . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 3.94 lp/mm
MTF, X-Ray . . . . . . . . . . . . . . . . . >48% @ 1 lp/mm (1 x
1), CsI screen
Energy Range . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 40 - 225 kVp
Fill Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 57%
Image Capture . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . Gigabit Ethernet
Scan Method . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . Progressive
A/D Conversion . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 16-bit
Frame Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 12.5 fps (1 x 1)
30 fps (2 x 2)
Data Output . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . Gigabit Ethernet
Exposure Control . . . . . . Opto Coupled, External Sync, Expose OK
Power
Power Dissipation . . . . . . . . . 12 Watts nominal power
consumption
11 to 35V input range, 15V typical
Power Supply/Mains . . . . . . . . . . . . . . . . . 100 - 240 VAC,
47 - 63 Hz
Software
The software release includes ViVA™, a basic application for image
acquisition and viewing on an end-user workstation running
Microsoft® Windows™. The developer’s software package includes a
“Virtual Command Processor” software interface that performs
detector calibration, detector set-up, image acquisition, and image
corrections. ViVA™ includes fifi le type translators for .viv,
.raw, .jpg,and .bmp fifi le formats.
Mechanical
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 9.2 lbs. (4.3 kg)
Housing Material . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . Aluminum
Sensor Protection Material . . . . . . . . . . . . . Carbon fifi
ber plate (2.5 mm thick) and aluminum
Environmental
Temperature Range - Operating . . . . . . . . . . . 10°C to 35°C
(max.) (measured on the back cover)
(Ambient) - Storage . . . . . . . . . . . . . . . . . . . . . . .
-20°C to +70°C
Humidity - Operating & Storage (non-condensing) . . . . 10 to 90%
Atmospheric Pressure - Operational & Storage 70 kPa to 106 kPa
Regulatory
Canada . . . . . . . . . . . . . . . . . . . . . . . . . .
CAN/CSA-C22.2 No. 61010-1
U.S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . UL 61010-1
Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . EN 61326-1:2013
®PaxScan is a Registered Trademark of Varex Imaging Corporation
Dimensions are for reference only
Dimensions are in mm
Notes:
1. Top surface of Active Area
3. Indicates center of Active Area
4. Input Voltage = 12 to 32V
5. Max Amps = .52A @ 24V
6. Power Dissipation = 12.48W
Detector Characterization Charts in accordance with ASTM E2597-14
Standard Practice
for the Manufacturing Characterization of Digital Detector Arrays
NOTE: SMTR, CS and Lag quality numbers all improve with higher
frame rate.
Full Resolution - 2pF Gain setting
Aluminum 6061
Titanium 6AI4V
Q1: How can I get a quotation?
A:Leave massage with your purchase requirements and we will reply you
ASAP. And you may contact us directly by Trade Manager or
Telephone.
Q2: Can you provide customized machine or SPM (Special purpose
machine)?
A:Yes, we provide Smart CNC solutions for our customer in order to
increase efficiency.
Q3: What's your warranty terms?
A:We will supply a replacement for parts that prove to be defective
for a period of 12 months, starting on the machine's bill of lading
date.
Q4: Why choose your company?
A:Products from the development, design, manufacture, assembly of the
entire production process are carried out between plants with a
complete production chain which is your most reliable guarantee.
And most of the CNC brands can be chosen as the users' needs.
Q5: Does the standard accessories are included in the price?
A:Yes, all of our prices include listed standard accessories.
Q6: Can your company send the technical personnel to our company
and direct our workers overseas?
A:We can supply this kind of service. When the machines arrive the
buyer's installation site, we can timely send mechanical and
electrical engineers to install according to the buyer's schedule.
All these can be quoted and list in the contract. The seller will
cooperate with the buyer to deal with visa and installation
preparation before going abroad.
Q7: How can I choose the most suitable machines?
A:Please list your specifications or the products drawing, we will
choose the most suitable machines for you.
Q8: What's your main products of your company?
A:We specialized in all kinds of machines, such as CNC Lathe, CNC
Milling Machine, Vertical Machining Center, Conventional Lathe,
Drilling Machine, Radial Drilling Machine, and so on.
Q9: What's the Payment Terms?
A:T/T 30% initial payment when order, 70% balance payment before
shipment.
irrevocable letter of credit at sight
