FTTH GPON EPON 480 Gbps Switching capacity 16 ports+ 2 slot POE
Switch
Description
This switch is 16*10/100M PoE Ports + 2*1000M Ethernet Port, using
high-quality high-speed network IC and the most stable POE chip,
POE port meets 802.3af/at standard, this series of PoE Switch can
be 10/100M Ethernet The network provides a seamless connection, and
the PoE power port can automatically detect and power the powered
devices that comply with the IEEE802.3af/at standards. The non-POE
device intelligently detects no power and only transmits data.
PoE (Power over Ethernet) refers to the technology of providing dc
Power supply to some IP-based terminals (such as IP telephone,
wireless access AP, network camera, etc.) while transmitting data
signals. These devices receiving dc Power supply are called
receiving devices.
This series of POE switches, using 8 POE ports + 2 uplink Gigabit
Ethernet port, the uplink port is to connect with the network
equipment which provide data.
Can transfer data for network surveillance cameras
Supports port auto-flip (Auto MDI/ MDIX)
Uplink port: 1.25Gbps fiber interface
Maximum power consumption: 30W
Adopts store-and-forward architecture
Features with fanless, natural cooling, small, compact andquiet
design, suitable for desktop or wall mounting
Built-in 1U rack power supply series, easy to place it
intostandard mounting brackets
Optic fiber module is not included, can be orderedseparately
Remote Web interface for Switch management
| Model | OFS-PE-GT2DT16 |
| Connector Type | 16 Port 10/100M PoE + 2 Port 10/100/1000M Ethernet Uplink |
| Network Protocols | IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.3ab |
| PoE Parameters | PoE Standard: IEEE802.3at (30W) and IEEE802.3af (15.4w) PoE compatibility: IEEE 802.3af/at adaptive PoE port output: DC52V Power Pin : 1/2(+) ; 3/6 (-) |
| DIP | VLAN: Port isolation mode. In this mode, the PoE ports (1-8) of the
switch cannot communicate with each other, and can only communicate
with the UP-link port. The port AI mode is turned on. |
| Default: Normal mode, all port can communicate with each other, the
transmission distance is within 100 meters, the transmission rate
is 10M / 100M adaptive; The port AI mode is closed. |
| Extend: Link extension mode, 1-8 ports PoE power supply and data
transmission distance can be extended to 250 meters, the
transmission rate becomes 10M, and the port AI mode is turned on. |
| Network Media | 10BASE-T: Cat 3,4,5 UTP(≤100 meter) 10BASE-T: Cat 6 UTP(≤250 meter) 100BASE-TX: Cat5 or more UTP (≤100 meter) |
| Power Supply | Power input: AC100-240V 50/60Hz, Output: 52V2.3A, Power Budget:
120W |
| Performance Specification | Bandwidth: 5.6Gbps |
| MAC Address: 2K |
| Packet Buffer Memory: 768K |
| Packet Forwarding Rate: 0.1488M pps/each port |
| Forwarding Mode: Store-And-Forward |
| Led indicator | PWR | Power supply indicator(Red) | Lighting:Powered Un-Light:No Power |
|
SW |
DIP indicator(Green) | OFF: Normal Vlan: Lighting Extend: Slow flash |
|
1-10 |
RJ-45 ACT indicator(Green) | Lighting:Connecting Flashing:Data Transmit Un-Light:Disconnect |
Company Profile
