Canaan AvalonMiner 1126 Review
The Canaan AvalonMiner 1126 is the first Bitcoin miner that has a
90Th/s produced by the company AvalonMiners. The device comes with
a maximum power consumption of 3420W. One of the miners that have a
high power consumption. It has a power efficiency of 38J/TH. It has
an integrated design for reliability.
This device integrates the power supply with the enclosure. It has
a maximum voltage of 285V and comes with a frequency ranging from
50Hz to 60Hz. The alternating current of the device is at 16A. The
Canaan AvalonMiner 1246 provides great flexibility and fits various
cabinet sizes. It has a dimension of (331 mm X 195 mm X 292mm). The
enclosure, which is made of aluminum, has a net weight of about
12.8Kg.
The device comes with four fans. These fans help in the dissipation
of heat from the machine. The machine produces a lot of heat due to
its high hash rate and its high power consumption. Still, the four
fans' presence helps to keep the machine at a temperature where it
is optimal and efficient by dissipating the heat produced from the
machine.
To improve the heat dissipation, the A1126 device is highly
equipped with a high temperature resistant 12038 cooler master
fans. The front has dual fans, and these fans are for air inlet.
They have seven blades each, which further increases the air
contact area pressure, deepening airflow penetration to the
enclosure while the interior dust is blowing away. This particular
design helps prevent dust accumulation on the dashboard, which can
cause a short circuit due to static electricity.
The fan is designed with a voltage of about 12V and a direct
current of 4.5A. The dual fans located in the rear area pushes away
warm interior air to achieve better heat dissipation. These fans
can also protect maintenance workers from blade injuries caused by
accidental contact with its surface.
It is designed in terms of software to dynamically accommodate
changes done in the mining sites, which help keep the operational
stability of miners safe, minimize the impact on the site grid, and
extend the mining life of the design. There is also a new web
management platform that can monitor miner’s conditions at any
point. In addition to all of these, the Auto alert on the devices
detects operating anomalies. If the machine has been detected to
malfunction, and it affects the hash rate of the device, the auto
alert will shut down the device.
In the case where there is a fluctuating hash rate, a built-in chip
in the main control board to analyze the fluctuations in the hash
rate through intelligent algorithms. It also adjusts the fan and
identifies potential network attacks and loopholes. It, however,
stabilizes the hash rate to avoid hash rate loss.
All Asic Miner machines are currently priced at very low prices and
are a good buying opportunity, if you have a long-term plan, order
it now! Miners should note that digital currency mining is a high
investment opportunity.
