Training on underground sewer follow-up work after trenchless CCTV
inspection
After the CCTV inspection, close the dedicated touch terminal
software and power off.
Move the crawler outside the pipeline, clean up the water stains
and dirt on the housing, and keep the device clean and dry.
After the on-site inspection, do not soak and rinse this product,
please mix the disinfectant solution with water in proportion and
use an available soft cloth to clean the control terminal and the
crawler, then dry them with a dry towel, do not let the crawler and
controller by extrusion, collision or impact, causing unnecessary
damage.
Pay attention to cleaning the rotating shaft of the camera unit
lens (pay special attention to cleaning the lens). During and after
use, pay attention to keeping this part clean. If there is a
foreign object, remove it carefully, if it can not be removed, do
not use brute force, please contact the dealer in time to avoid
mechanical damage to the shaft.
If the brush is to be cleaned, the following operations can be
carried out:
Control cable, cable drum, etc.: Before recycling the cables, wipe
the water and dirt from the cable with a cloth to check for damage.
Camera, crawler: Remove them from the pipeline and untie the
connected cable, remove the dirt with a hard brush or water, then
dry them with a dry cloth or a heater.
The lens of the camera and lighting: Clean them with a soft damp
cloth to prevent the lens from being scratched.
Connections, connectors, slots: Keep all cables and electronic
connectors clean, and clean them with a small brush dipped in
industrial alcohol.
Tires, shaft: Keep them clean, and check the wear of the wheel and
rack frequently. Check whether all locking parts are firm, replace
damaged parts, and install missing parts in time.
Display screen: Use a slightly damp cloth for cleaning, do not use
organic solvents for cleaning these parts.
▼The device must be cleaned after each use. For problems caused by
rough use, we reserve the right to reduce the warranty period to 6
months.
| Technologies available | CCTV crawler inspection |
| Duration | 16 hours |
| Type | Online and job sites if allowed |
