- Two-guided guided bar supports, double-balanced rapid injection.
- The high-torque hydraulic motors offer a stable plasticizing
capacity, highprecision electronic device position detection enable
accurate measurement.
- Multi-injection speed and pressure and multi-level holding
pressure settings, switch from the injection time, location,
pressure control to ensure the quality of molding.
- Multi-level back-pressure of pre-plastic and pre-speed are
computer-controlled, anti- drooling and automated auto purge.
- Expected to prevent cold-start function to ensure that the screw,
Liao Tong will not be harmed. Stability of the injection unit.
- Security doors fitted with hydraulic, mechanical and electrical
interlocking triple safety device. When the safety door is open,
the machine cannot clamp.
- Low pressure mold protection device to prevent damage to platen.
- Plywood, frame, the bridge, and the template attached structure,
the finite element analysis.
- Hydraulic ejector, adjustable stroke, and top speed of ejector in
and out, for multiple actions.
- Flexible tie bars nut eliminates fatigue fracture; assure the
working life of tie bars - Automatic adjustment. The replacement of
different mold, the parameters set by clamping force to achieve the
automatic adjustment.
- High-precision electronic detection device, multi-stage control
of opening stoke, speed and location, location accuracy.
Screw diameter(mm) | 56 |
Theoretical Shot size(cm³) | 700 |
Shot weight (g) | 690 |
Injection pressure(Mpa) | 178 |
Injection rate(g/s) | 215 |
Screw L/D ratio(L/D) | 21.6 |
Screw speed(r.p.m) | 0-180 |
Nozzle Diameter(Srmm) | 20 |
Clamp tonnage (KN) | 2600 |
Toggle stroke(mm) | 570 |
Mould Thickness(mm) | 200-580 |
Space between tie-bars(mm) | 580X580 |
Ejector stroke(mm) | 160 |
Ejector tonnage(KN) | 70 |
Ejector number(pcs) | 9 |
Heat power(KW) | 18.5 |
Max. pump pressure(Mpa) | 16 |
Valve Size(mm) | 16 |
Machine dimension(mm) | 6300*1700*1800 |
Machine weight(kg) | 8000 |
Oil tank capacity(L) | 350 |
Number of mold cavities within 20g: 24Cav, output 8600pcs; Number
of mold cavities within 20-30g: 16cav, output 5600pcs. The weight
of the large bottle preform should not exceed 110g, the output of
110g is 1200pcs, and the number of cavities can only be 4 cavities.
Details:
